From f44fa354a0715577ca32b085f6f60bcf32c748dd Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 1 Feb 2025 12:27:29 +0100 Subject: [PATCH 1/2] ARM: dts: bcm2711: Fix xHCI power-domain During s2idle tests on the Raspberry CM4 the VPU firmware always crashes on xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze > state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Power grafx off [ 70.761127] USB: Set power to 0 [ 74.653040] USB: Failed to set power to 1 (-110) This seems to be caused because of the mixed usage of raspberrypi-power and bcm2835-power at the same time. So avoid the usage of the VPU firmware power-domain driver, which prevents the VPU crash. Fixes: 522c35e08b53 ("ARM: dts: bcm2711: Add BCM2711 xHCI support") Link: https://github.com/raspberrypi/linux/issues/6537 Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20250201112729.31509-1-wahrenst@gmx.net Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 5 ----- arch/arm/boot/dts/broadcom/bcm2711.dtsi | 1 + 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi index 6bf4241fe3b7..c78ed064d166 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm2835-rpi.dtsi" -#include #include / { @@ -101,7 +100,3 @@ &vchiq { interrupts = ; }; - -&xhci { - power-domains = <&power RPI_POWER_DOMAIN_USB>; -}; diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi index e4e42af21ef3..5eaec6c6a1df 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi @@ -610,6 +610,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; + power-domains = <&pm BCM2835_POWER_DOMAIN_USB>; /* DWC2 and this IP block share the same USB PHY, * enabling both at the same time results in lockups. * So keep this node disabled and let the bootloader From 0de09025f161f67c07978c4742e221243d070d41 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Sun, 23 Feb 2025 13:56:13 +0100 Subject: [PATCH 2/2] ARM: dts: bcm2711: PL011 UARTs are actually r1p5 The ARM PL011 UART instances in BCM2711 are r1p5 spec, which means they have 32-entry FIFOs. The correct periphid value for this is 0x00341011. Thanks to N Buchwitz for pointing this out. Signed-off-by: Phil Elwell Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20250223125614.3592-2-wahrenst@gmx.net Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/broadcom/bcm2711.dtsi | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi index 5eaec6c6a1df..4fd0732a34d3 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi @@ -134,7 +134,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -145,7 +145,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -156,7 +156,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -167,7 +167,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -1178,6 +1178,7 @@ }; &uart0 { + arm,primecell-periphid = <0x00341011>; interrupts = ; };