V4L/DVB (5975): cx88: Wrong values used for HD-3000 radio mode

Browse source

After some tedious work with a logic probe and a magnifying glass, I've
determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz
IF output on pin 12 and the FM 10.7MHz If output on pin 11.  GPIO 2 is used to
switch the card's analog sound output from from the analog input connector to
the CX23883's audio DACs.

So, in radio mode GPIO2 = 1 and GPIO7 = 0.

Add some comments about how the HD-3000's GPIOs are connected.

Delete the vmux setting for the radio, as vmux doesn't apply to radio mode.
Also delete the lines setting unused gpio words to zero; it's not necessary as
0 is the default value for uninitialized fields.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

...

This commit is contained in:

Trent Piepho 2007-07-31 23:06:50 -03:00 • committed by Mauro Carvalho Chehab

parent bfd7beacff

commit 19dc74b7c5

1 changed files with 13 additions and 14 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

27

drivers/media/video/cx88/cx88-cards.c

View file