regulator: bd718x7 fix regulator states at SUSPEND

Browse source

The BD718(37/47/50) regulator enable states can be controlled
either by SW or by PMIC internal state machine. The bd718x7
driver has not supported leaving the regulators under HW state
machine control (except for cases where this is required to
avoid boot-up problems due to critical regulators being turned
OFF at reset when SNVS used as reset state).

On some systems this is undesirable as there now are setups where
mixture of SW and HW state machine controlled regulators is needed.

Specifically, some SoCs signal SUSPEND state change to PMIC via
STBY_REQ line. Now there are setups that expect certain regulators
then to be disabled (by PMIC state machine) while other regulators
should stay enabled (regardless of HW state => SW control required).

Add support for a new device-tree property
"rohm,no-regulator-enable-control" which can be used to leave
regulator(s) under HW state machine control.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/6ebba33dd08f2dcc9f1137bbff4d2dc905278a5a.1599029335.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>

...

This commit is contained in:

Matti Vaittinen 2020-09-03 21:39:02 +03:00 • committed by Mark Brown

parent df9db2541a

commit 1d848d681c

No known key found for this signature in database

GPG key ID: 24D68B725D5487D0

1 changed files with 268 additions and 149 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

407

drivers/regulator/bd718x7-regulator.c

View file