diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 7416d2e1e358..5bbf78d44a74 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -41,6 +41,13 @@
 #define EXYNOS2200_CLKRST_LINK_PCLK_SEL		BIT(1)
 
 #define EXYNOS2200_DRD_UTMI			0x10
+
+/* ExynosAutov920 bits */
+#define UTMICTL_FORCE_UTMI_SUSPEND		BIT(13)
+#define UTMICTL_FORCE_UTMI_SLEEP		BIT(12)
+#define UTMICTL_FORCE_DPPULLDOWN		BIT(9)
+#define UTMICTL_FORCE_DMPULLDOWN		BIT(8)
+
 #define EXYNOS2200_UTMI_FORCE_VBUSVALID		BIT(1)
 #define EXYNOS2200_UTMI_FORCE_BVALID		BIT(0)
 
@@ -250,6 +257,22 @@
 #define EXYNOS850_DRD_HSP_TEST			0x5c
 #define HSP_TEST_SIDDQ				BIT(24)
 
+#define EXYNOSAUTOV920_DRD_HSP_CLKRST		0x100
+#define HSPCLKRST_PHY20_SW_PORTRESET		BIT(3)
+#define HSPCLKRST_PHY20_SW_POR			BIT(1)
+#define HSPCLKRST_PHY20_SW_POR_SEL		BIT(0)
+
+#define EXYNOSAUTOV920_DRD_HSPCTL		0x104
+#define HSPCTRL_VBUSVLDEXTSEL			BIT(13)
+#define HSPCTRL_VBUSVLDEXT			BIT(12)
+#define HSPCTRL_EN_UTMISUSPEND			BIT(9)
+#define HSPCTRL_COMMONONN			BIT(8)
+
+#define EXYNOSAUTOV920_DRD_HSP_TEST		0x10c
+
+#define EXYNOSAUTOV920_DRD_HSPPLLTUNE		0x110
+#define HSPPLLTUNE_FSEL				GENMASK(18, 16)
+
 /* Exynos9 - GS101 */
 #define EXYNOS850_DRD_SECPMACTL			0x48
 #define SECPMACTL_PMA_ROPLL_REF_CLK_SEL		GENMASK(13, 12)
@@ -2054,6 +2077,140 @@ static const struct exynos5_usbdrd_phy_drvdata exynos990_usbdrd_phy = {
 	.n_regulators		= ARRAY_SIZE(exynos5_regulator_names),
 };
 
+static void
+exynosautov920_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
+{
+	void __iomem *reg_phy = phy_drd->reg_phy;
+	u32 reg;
+
+	/*
+	 * Disable HWACG (hardware auto clock gating control). This
+	 * forces QACTIVE signal in Q-Channel interface to HIGH level,
+	 * to make sure the PHY clock is not gated by the hardware.
+	 */
+	reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL);
+	reg |= LINKCTRL_FORCE_QACT;
+	writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL);
+
+	/* De-assert link reset */
+	reg = readl(reg_phy + EXYNOS2200_DRD_CLKRST);
+	reg &= ~CLKRST_LINK_SW_RST;
+	writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST);
+
+	/* Set PHY POR High */
+	reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST);
+	reg |= HSPCLKRST_PHY20_SW_POR | HSPCLKRST_PHY20_SW_POR_SEL;
+	writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST);
+
+	/* Enable UTMI+ */
+	reg = readl(reg_phy + EXYNOS2200_DRD_UTMI);
+	reg &= ~(UTMICTL_FORCE_UTMI_SUSPEND | UTMICTL_FORCE_UTMI_SLEEP |
+		UTMICTL_FORCE_DPPULLDOWN | UTMICTL_FORCE_DMPULLDOWN);
+	writel(reg, reg_phy + EXYNOS2200_DRD_UTMI);
+
+	/* set phy clock & control HS phy */
+	reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSPCTL);
+	reg |= HSPCTRL_EN_UTMISUSPEND | HSPCTRL_COMMONONN;
+	writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPCTL);
+
+	fsleep(100);
+
+	/* Set VBUS Valid and DP-Pull up control by VBUS pad usage */
+	reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL);
+	reg |= FIELD_PREP_CONST(LINKCTRL_BUS_FILTER_BYPASS, 0xf);
+	writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL);
+
+	reg = readl(reg_phy + EXYNOS2200_DRD_UTMI);
+	reg |= EXYNOS2200_UTMI_FORCE_VBUSVALID | EXYNOS2200_UTMI_FORCE_BVALID;
+	writel(reg, reg_phy + EXYNOS2200_DRD_UTMI);
+
+	reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSPCTL);
+	reg |= HSPCTRL_VBUSVLDEXTSEL | HSPCTRL_VBUSVLDEXT;
+	writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPCTL);
+
+	/* Setting FSEL for refference clock */
+	reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSPPLLTUNE);
+	reg &= ~HSPPLLTUNE_FSEL;
+
+	switch (phy_drd->extrefclk) {
+	case EXYNOS5_FSEL_50MHZ:
+		reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 7);
+		break;
+	case EXYNOS5_FSEL_26MHZ:
+		reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 6);
+		break;
+	case EXYNOS5_FSEL_24MHZ:
+		reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 2);
+		break;
+	case EXYNOS5_FSEL_20MHZ:
+		reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 1);
+		break;
+	case EXYNOS5_FSEL_19MHZ2:
+		reg |= FIELD_PREP(HSPPLLTUNE_FSEL, 0);
+		break;
+	default:
+		dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n",
+			 phy_drd->extrefclk);
+		break;
+	}
+	writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSPPLLTUNE);
+
+	/* Enable PHY Power Mode */
+	reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST);
+	reg &= ~HSP_TEST_SIDDQ;
+	writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST);
+
+	/* before POR low, 10us delay is needed to Finish PHY reset */
+	fsleep(10);
+
+	/* Set PHY POR Low */
+	reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST);
+	reg |= HSPCLKRST_PHY20_SW_POR_SEL;
+	reg &= ~(HSPCLKRST_PHY20_SW_POR | HSPCLKRST_PHY20_SW_PORTRESET);
+	writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_CLKRST);
+
+	/* after POR low and delay 75us, PHYCLOCK is guaranteed. */
+	fsleep(75);
+
+	/* force pipe3 signal for link */
+	reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL);
+	reg |= LINKCTRL_FORCE_PIPE_EN;
+	reg &= ~LINKCTRL_FORCE_PHYSTATUS;
+	reg |= LINKCTRL_FORCE_RXELECIDLE;
+	writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL);
+}
+
+static void
+exynosautov920_usbdrd_hsphy_disable(struct exynos5_usbdrd_phy *phy_drd)
+{
+	u32 reg;
+	void __iomem *reg_phy = phy_drd->reg_phy;
+
+	/* set phy clock & control HS phy */
+	reg = readl(reg_phy + EXYNOS2200_DRD_UTMI);
+	reg |= UTMICTL_FORCE_UTMI_SUSPEND | UTMICTL_FORCE_UTMI_SLEEP;
+	reg &= ~(UTMICTL_FORCE_DPPULLDOWN | UTMICTL_FORCE_DMPULLDOWN);
+	writel(reg, reg_phy + EXYNOS2200_DRD_UTMI);
+
+	/* Disable PHY Power Mode */
+	reg = readl(reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST);
+	reg |= HSP_TEST_SIDDQ;
+	writel(reg, reg_phy + EXYNOSAUTOV920_DRD_HSP_TEST);
+
+	/* clear force q-channel */
+	reg = readl(reg_phy + EXYNOS850_DRD_LINKCTRL);
+	reg &= ~LINKCTRL_FORCE_QACT;
+	writel(reg, reg_phy + EXYNOS850_DRD_LINKCTRL);
+
+	/* link sw reset is need for USB_DP/DM high-z in host mode */
+	reg = readl(reg_phy + EXYNOS2200_DRD_CLKRST);
+	reg |= CLKRST_LINK_SW_RST;
+	writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST);
+	fsleep(10);
+	reg &= ~CLKRST_LINK_SW_RST;
+	writel(reg, reg_phy + EXYNOS2200_DRD_CLKRST);
+}
+
 static int exynosautov920_usbdrd_phy_init(struct phy *phy)
 {
 	struct phy_usb_instance *inst = phy_get_drvdata(phy);
@@ -2095,6 +2252,27 @@ static int exynosautov920_usbdrd_phy_exit(struct phy *phy)
 	return 0;
 }
 
+static int exynosautov920_usbdrd_combo_phy_exit(struct phy *phy)
+{
+	struct phy_usb_instance *inst = phy_get_drvdata(phy);
+	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+	int ret = 0;
+
+	ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks);
+	if (ret)
+		return ret;
+
+	if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI)
+		exynosautov920_usbdrd_hsphy_disable(phy_drd);
+
+	/* enable PHY isol */
+	inst->phy_cfg->phy_isol(inst, true);
+
+	clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks);
+
+	return 0;
+}
+
 static int exynosautov920_usbdrd_phy_power_on(struct phy *phy)
 {
 	struct phy_usb_instance *inst = phy_get_drvdata(phy);
@@ -2146,6 +2324,36 @@ static const char * const exynosautov920_usb20_regulators[] = {
 	"dvdd", "vdd18", "vdd33",
 };
 
+static const struct phy_ops exynosautov920_usbdrd_combo_hsphy_ops = {
+	.init		= exynosautov920_usbdrd_phy_init,
+	.exit		= exynosautov920_usbdrd_combo_phy_exit,
+	.power_on	= exynosautov920_usbdrd_phy_power_on,
+	.power_off	= exynosautov920_usbdrd_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct
+exynos5_usbdrd_phy_config usbdrd_hsphy_cfg_exynosautov920[] = {
+	{
+		.id		= EXYNOS5_DRDPHY_UTMI,
+		.phy_isol	= exynos5_usbdrd_phy_isol,
+		.phy_init	= exynosautov920_usbdrd_utmi_init,
+	},
+};
+
+static const
+struct exynos5_usbdrd_phy_drvdata exynosautov920_usbdrd_combo_hsphy = {
+	.phy_cfg		= usbdrd_hsphy_cfg_exynosautov920,
+	.phy_ops		= &exynosautov920_usbdrd_combo_hsphy_ops,
+	.pmu_offset_usbdrd0_phy	= EXYNOSAUTOV920_PHY_CTRL_USB20,
+	.clk_names		= exynos5_clk_names,
+	.n_clks			= ARRAY_SIZE(exynos5_clk_names),
+	.core_clk_names		= exynos5_core_clk_names,
+	.n_core_clks		= ARRAY_SIZE(exynos5_core_clk_names),
+	.regulator_names	= exynosautov920_usb20_regulators,
+	.n_regulators		= ARRAY_SIZE(exynosautov920_usb20_regulators),
+};
+
 static const struct phy_ops exynosautov920_usbdrd_phy_ops = {
 	.init		= exynosautov920_usbdrd_phy_init,
 	.exit		= exynosautov920_usbdrd_phy_exit,
@@ -2380,6 +2588,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
 	}, {
 		.compatible = "samsung,exynos990-usbdrd-phy",
 		.data = &exynos990_usbdrd_phy
+	}, {
+		.compatible = "samsung,exynosautov920-usbdrd-combo-hsphy",
+		.data = &exynosautov920_usbdrd_combo_hsphy
 	}, {
 		.compatible = "samsung,exynosautov920-usbdrd-phy",
 		.data = &exynosautov920_usbdrd_phy