PCI: imx6: Add CLKREQ# override to enable REFCLK for i.MX95 PCIe

Browse source

The CLKREQ# is an open drain, active low signal that is driven low by
the card to request reference clock. It's an optional signal added in
PCIe CEM r4.0, sec 2. Thus, this signal wouldn't be driven low if it's
not exposed on the slot.

On the i.MX95 EVK board, REFCLK to the host and endpoint is gated by this
CLKREQ# signal. So if the CLKREQ# signal is not driven by the endpoint, it
will gate the REFCLK to host too, leading to operational failure.

Hence, enable the REFCLK on this SoC by enabling the CLKREQ# override using
imx95_pcie_clkreq_override() helper during probe. This override should only
be cleared when the CLKREQ# signal is exposed on the slot.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251015030428.2980427-11-hongxing.zhu@nxp.com

...

This commit is contained in:

Richard Zhu 2025-10-15 11:04:27 +08:00 • committed by Manivannan Sadhasivam

parent c577ce2881

commit 27a064aba2

1 changed files with 20 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

20

drivers/pci/controller/dwc/pci-imx6.c

View file