diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 485d8ba97723..fae26f035186 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -20,53 +20,24 @@
 #define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
 #define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
 #define CAP11XX_REG_MAIN_CONTROL_DLSEEP		BIT(4)
-#define CAP11XX_REG_GENERAL_STATUS	0x02
 #define CAP11XX_REG_SENSOR_INPUT	0x03
-#define CAP11XX_REG_NOISE_FLAG_STATUS	0x0a
 #define CAP11XX_REG_SENOR_DELTA(X)	(0x10 + (X))
 #define CAP11XX_REG_SENSITIVITY_CONTROL	0x1f
 #define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK	0x70
-#define CAP11XX_REG_CONFIG		0x20
-#define CAP11XX_REG_SENSOR_ENABLE	0x21
-#define CAP11XX_REG_SENSOR_CONFIG	0x22
-#define CAP11XX_REG_SENSOR_CONFIG2	0x23
-#define CAP11XX_REG_SAMPLING_CONFIG	0x24
-#define CAP11XX_REG_CALIBRATION		0x26
-#define CAP11XX_REG_INT_ENABLE		0x27
 #define CAP11XX_REG_REPEAT_RATE		0x28
 #define CAP11XX_REG_SIGNAL_GUARD_ENABLE	0x29
-#define CAP11XX_REG_MT_CONFIG		0x2a
-#define CAP11XX_REG_MT_PATTERN_CONFIG	0x2b
-#define CAP11XX_REG_MT_PATTERN		0x2d
-#define CAP11XX_REG_RECALIB_CONFIG	0x2f
 #define CAP11XX_REG_SENSOR_THRESH(X)	(0x30 + (X))
-#define CAP11XX_REG_SENSOR_NOISE_THRESH	0x38
-#define CAP11XX_REG_STANDBY_CHANNEL	0x40
-#define CAP11XX_REG_STANDBY_CONFIG	0x41
-#define CAP11XX_REG_STANDBY_SENSITIVITY	0x42
-#define CAP11XX_REG_STANDBY_THRESH	0x43
 #define CAP11XX_REG_CONFIG2		0x44
 #define CAP11XX_REG_CONFIG2_ALT_POL	BIT(6)
-#define CAP11XX_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
-#define CAP11XX_REG_LED_POLARITY	0x73
 #define CAP11XX_REG_LED_OUTPUT_CONTROL	0x74
 #define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG	0x80
 #define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2	0x81
-
-#define CAP11XX_REG_LED_DUTY_CYCLE_1	0x90
-#define CAP11XX_REG_LED_DUTY_CYCLE_2	0x91
-#define CAP11XX_REG_LED_DUTY_CYCLE_3	0x92
 #define CAP11XX_REG_LED_DUTY_CYCLE_4	0x93
 
-#define CAP11XX_REG_LED_DUTY_MIN_MASK	(0x0f)
-#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT	(0)
 #define CAP11XX_REG_LED_DUTY_MAX_MASK	(0xf0)
 #define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT	(4)
 #define CAP11XX_REG_LED_DUTY_MAX_VALUE	(15)
 
-#define CAP11XX_REG_SENSOR_CALIB	(0xb1 + (X))
-#define CAP11XX_REG_SENSOR_CALIB_LSB1	0xb9
-#define CAP11XX_REG_SENSOR_CALIB_LSB2	0xba
 #define CAP11XX_REG_PRODUCT_ID		0xfd
 #define CAP11XX_REG_MANUFACTURER_ID	0xfe
 #define CAP11XX_REG_REVISION		0xff
@@ -111,37 +82,15 @@ struct cap11xx_hw_model {
 
 static const struct reg_default cap11xx_reg_defaults[] = {
 	{ CAP11XX_REG_MAIN_CONTROL,		0x00 },
-	{ CAP11XX_REG_GENERAL_STATUS,		0x00 },
-	{ CAP11XX_REG_SENSOR_INPUT,		0x00 },
-	{ CAP11XX_REG_NOISE_FLAG_STATUS,	0x00 },
 	{ CAP11XX_REG_SENSITIVITY_CONTROL,	0x2f },
-	{ CAP11XX_REG_CONFIG,			0x20 },
-	{ CAP11XX_REG_SENSOR_ENABLE,		0x3f },
-	{ CAP11XX_REG_SENSOR_CONFIG,		0xa4 },
-	{ CAP11XX_REG_SENSOR_CONFIG2,		0x07 },
-	{ CAP11XX_REG_SAMPLING_CONFIG,		0x39 },
-	{ CAP11XX_REG_CALIBRATION,		0x00 },
-	{ CAP11XX_REG_INT_ENABLE,		0x3f },
 	{ CAP11XX_REG_REPEAT_RATE,		0x3f },
-	{ CAP11XX_REG_MT_CONFIG,		0x80 },
-	{ CAP11XX_REG_MT_PATTERN_CONFIG,	0x00 },
-	{ CAP11XX_REG_MT_PATTERN,		0x3f },
-	{ CAP11XX_REG_RECALIB_CONFIG,		0x8a },
 	{ CAP11XX_REG_SENSOR_THRESH(0),		0x40 },
 	{ CAP11XX_REG_SENSOR_THRESH(1),		0x40 },
 	{ CAP11XX_REG_SENSOR_THRESH(2),		0x40 },
 	{ CAP11XX_REG_SENSOR_THRESH(3),		0x40 },
 	{ CAP11XX_REG_SENSOR_THRESH(4),		0x40 },
 	{ CAP11XX_REG_SENSOR_THRESH(5),		0x40 },
-	{ CAP11XX_REG_SENSOR_NOISE_THRESH,	0x01 },
-	{ CAP11XX_REG_STANDBY_CHANNEL,		0x00 },
-	{ CAP11XX_REG_STANDBY_CONFIG,		0x39 },
-	{ CAP11XX_REG_STANDBY_SENSITIVITY,	0x02 },
-	{ CAP11XX_REG_STANDBY_THRESH,		0x40 },
 	{ CAP11XX_REG_CONFIG2,			0x40 },
-	{ CAP11XX_REG_LED_POLARITY,		0x00 },
-	{ CAP11XX_REG_SENSOR_CALIB_LSB1,	0x00 },
-	{ CAP11XX_REG_SENSOR_CALIB_LSB2,	0x00 },
 };
 
 static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)