ARM: at91/dt: add ethernet phy to at91rm9200ek board

Browse source

Add ethernet phy node in at91rm9200ek.dts.
The reg register is not specified, as it may differ depending on the init
process of the board:
ADDR0/1 phy pins are connected to PA13/14 rm9200 pins. Which means the phy
will take its address from these pins during the reset process.

The macb driver will launch a full scan on the mdio bus to discover the phy
address.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
[nicolas.ferre@atmel.com: changed to IRQ_TYPE_EDGE_BOTH as asked by Boris]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

...

This commit is contained in:

Boris BREZILLON 2013-08-28 13:03:39 +02:00 • committed by Nicolas Ferre

parent 5cffba20f0

commit 44fa054e08

1 changed files with 5 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

5

arch/arm/boot/dts/at91rm9200ek.dts

View file