pinctrl: spacemit: support I/O power domain configuration

Browse source

Dual-voltage GPIO banks default to 3.3V operation. Even when a bank is
externally supplied with 1.8V, the internal logic remains in the 3.3V
domain, leading to functional failures.

Add support for programming the IO domain power control registers to
allow explicit configuration for 1.8V operation.

These registers are secure due to hardware safety constraints.
Specifically, configuring the domain for 1.8V while externally supplying
3.3V causes back-powering and potential pin damage. Consequently, access
requires unlocking the AIB Secure Access Register (ASAR) in the APBC
block before any read or write operation.

Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>

...

This commit is contained in:

Troy Mitchell 2026-01-08 14:42:39 +08:00 • committed by Linus Walleij

parent e817f0223d

commit 450e2487d5

1 changed files with 126 additions and 3 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

129

drivers/pinctrl/spacemit/pinctrl-k1.c

View file