iio: pressure: add Honeywell ABP2 driver

Adds driver for digital Honeywell ABP2 series of board mount
pressure and temperature sensors.

This driver covers 113 different pressure ranges and units on
both i2c and SPI buses.

The communication protocol involves sending two simple commands
to the sensor and there is no register access or a memory map.
For this reason the regmap API was not used.

The i2c address is hardcoded and depends on the part number.

Optional end of conversion interrupt control is present on the
i2c variants of the chips.
The EOC can also be defined for the SPI variants if a non-ABP2
but compatible chip is to be driven.

Tested on two sensors (ABP2MRRT001PDSA3 and ABP2DANT001BA2A3).

ocuments/sps-siot-abp2-series-datasheet-32350268-en.pdf

Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp2-series/d
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Petre Rodan 2025-12-07 08:00:48 +02:00 • committed by Jonathan Cameron
commit 47d323ce1e
7 changed files with 807 additions and 0 deletions