From 4e627981cc474ea8b23cb6f8833ef5079796ade9 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 19 Oct 2018 16:14:50 +0800 Subject: [PATCH] USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub commit 781f0766cc41a9dd2e5d118ef4b1d5d89430257b upstream. Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: - Drop module parameter changes - We don't have a USB_PORT_QUIRK_FAST_ENUM quirk] Signed-off-by: Ben Hutchings --- drivers/usb/core/hub.c | 10 +++++++++- drivers/usb/core/quirks.c | 3 +++ include/linux/usb/quirks.h | 3 +++ 3 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a8ee99e56071..5f745de0ac24 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2671,6 +2671,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, int i, status; u16 portchange, portstatus; struct usb_port *port_dev = hub->ports[port1 - 1]; + int reset_recovery_time; if (!hub_is_superspeed(hub->hdev)) { if (warm) { @@ -2760,7 +2761,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { /* TRSTRCY = 10 ms; plus some extra */ - msleep(10 + 40); + reset_recovery_time = 10 + 40; + + /* Hub needs extra delay after resetting its port. */ + if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) + reset_recovery_time += 100; + + msleep(reset_recovery_time); + if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 7b722da17880..cf4487d51efc 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -229,6 +229,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 70b965c25e3a..efc4e51c425a 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -59,4 +59,7 @@ /* Device needs a pause after every control message. */ #define USB_QUIRK_DELAY_CTRL_MSG BIT(13) +/* Hub needs extra delay after resetting its port. */ +#define USB_QUIRK_HUB_SLOW_RESET BIT(14) + #endif /* __LINUX_USB_QUIRKS_H */