arm64: dts: rockchip: switch Rock 5C to PMIC-based TSHUT reset

Browse source

Radxa Rock 5C supports both CRU-based (default) and PMIC-based reset
upon thermal runaway conditions. The former resets the SoC by internally
poking the CRU from TSADC, while the latter power-cycles the whole board
by pulling the PMIC reset line low in case of uncontrolled overheating.

Switch to a PMIC-based reset, as the more 'thorough' of the two.

Tested by temporarily setting rockchip,hw-tshut-temp to 65C to simulate
overheating - this causes the board to reset when any of the on-chip
temperature sensors surpasses the tshut temperature.

Requires Alexander's patch [1] fixing TSADC pinctrl assignment

[1] https://lore.kernel.org/r/20250130053849.4902-1-eagle.alexander923@gmail.com

Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250204-rock-5c-tshut-v1-1-33301e4eef64@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

...

This commit is contained in:

Alexey Charkov 2025-02-04 13:02:28 +04:00 • committed by Heiko Stuebner

parent aba881f30e

commit 52cababc9c

1 changed files with 2 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

2

arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts

View file