mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
The Ethernet controller available in Meson8b and GXBB SoCs is a Synopsys DesignWare MAC IP core which is already supported by the stmmac driver. In addition to the standard stmmac driver some Meson8b / GXBB specific registers have to be configured for the PHY clocks. These SoC specific registers are called PRG_ETHERNET_ADDR0 and PRG_ETHERNET_ADDR1 in the datasheet. These registers are not backwards compatible with those on Meson 6b, which is why a new glue driver is introduced. This worked for many boards because the bootloader programs the PRG_ETHERNET registers correctly. Additionally the meson6-dwmac driver only sets bit 1 of PRG_ETHERNET_ADDR0 which (according to the datasheet) is only used during reset. Currently all configuration values can be determined automatically, based on the configured phy-mode (which is mandatory for the stmmac driver). If required the tx-delay and the mux clock (so it supports the MPLL2 clock as well) can be made configurable in the future. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This commit is contained in:
parent
1b0acbfdb8
commit
566e825162
3 changed files with 328 additions and 4 deletions
Loading…
Add table
Add a link
Reference in a new issue