arm64: dts: imx8mm-venice-gw7901: add support for USB hub subload

Browse source

The USB hub has it's reset as GPIO4_IO17 but can be sub-loaded and
VBUS provided by a VBUS regulator with GPIO4_IO2 as the enable and
GPIO1_IO15 as the active-low over-current.

Enable pull-up for GPIO4_IO17 to keep hub out of reset and move VBUS
enable to GPIO4_IO2. Additionally enable pull-up on GPIO1_IO15 so that
if the hub is loaded it never over-currents.

This allows USB to work in both configurations without a device-tree
change.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

...

This commit is contained in:

Tim Harvey 2021-07-27 09:11:00 -07:00 • committed by Shawn Guo

parent bd306fdb4e

commit 590dc51bca

1 changed files with 4 additions and 3 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

7

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts

View file