net: stmmac: rk: use rk_encode_wm16() for clock selection

Browse source

Use rk_encode_wm16() for RMII clock gating control, and also for the
io_clksel bit used to select the transmit clock between CRU-derived
and IO-derived clock sources.

Both of these were configured via the "set_clock_selection" method in
the SoC specific operations, but there is no requirement to change the
io_clksel except when enabling clocks.

It is also possible that we don't need to ungate the RMII clock if we
are operating in RGMII mode, but this commit makes no change there.

Split up the configuration of these as separate functions, and remove
the set_clock_selection() method. Since these clocking bits are in the
same register that we call the "speed" register, move the logic for
writing that register into rk_write_speed_grf_reg().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYy6-00000007hp9-1AJM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

...

This commit is contained in:

Russell King (Oracle) 2026-02-04 09:14:38 +00:00 • committed by Jakub Kicinski

parent d7d92037cb

commit 5c1fc7cb81

1 changed files with 75 additions and 99 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

174

drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c

View file