media: ov2740: Ensure proper reset sequence on probe()

Browse source

Before this commit on probe() the driver would do:

reset=1                // from probe() calling gpiod_get(GPIOD_OUT_HIGH)
reset=0                // from resume()
msleep(20)             // from resume()

So if reset was 0 before getting the GPIO the reset line would only be
driven high for a very short time and sometimes there would be errors
reading the id register afterwards.

Add a msleep(20) after getting the reset line to ensure the sensor is
properly reset:

reset=1                // from probe() calling gpiod_get(GPIOD_OUT_HIGH)
msleep(20)             // from probe()
reset=0                // from resume()
msleep(20)             // from resume()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

...

This commit is contained in:

Hans de Goede 2024-05-06 15:24:38 +02:00 • committed by Hans Verkuil

parent 4ff61c4ce9

commit 6983352784

1 changed files with 8 additions and 1 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

9

drivers/media/i2c/ov2740.c

View file