arm64: dts: ti: k3-j7200: Add node to disable loopback connection

Browse source

CTRLMMR_MCU_SPI1_CTRL register controls if MCU_SPI1 is directly
connected to SPI3 in the MAIN Domain (default) or if MCU_SPI1
and SPI3 are independently pinned out. By default, the field
SPI1_LINKDIS (Bit 0) is set to 0h. In order to disable the direct
connection, the SPI1_LINKDIS (Bit 0) needs to be set to 1h. Model
this functionality as a "reg-mux" device and based on the idle-state
property, enable/disable the connection bewtween MCU_SPI1 and MAIN_SPI3.

The register field description has been referred from J7200 TRM [1]
(Table 5-517. CTRLMMR_MCU_SPI1_CTRL Register Field Descriptions).

[1] https://www.ti.com/lit/pdf/spruiu1

Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://lore.kernel.org/r/20241127075644.210759-1-a-dutta@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

...

This commit is contained in:

Anurag Dutta 2024-11-27 13:26:44 +05:30 • committed by Nishanth Menon

parent b48888c9c4

commit 6b51892b31

2 changed files with 11 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

4

arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts

View file

7

arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi

View file