iio: adc: ad7476: Support ROHM BD79105

Browse source

The ROHM BD79105 is a simple 16-bit ADC accessible via SPI*.

The BD79105 has a CONVSTART pin, which must be set high to start the ADC
conversion. Unlike with the ad7091 and ad7091r which also have a
CONVSTART pin, the BD79105 requires that the pin must remain high also
for the duration of the SPI access.

(*) Couple of words about the SPI. The BD79105 has pins named as
CONVSTART, SCLK, DIN and DOUT. For the curious reader, DIN is not SPI
ISO.

DIN is a signal which can be used as a chip-select. When DIN is pulled
low, the ADC will output the completed measurement via DOUT as SCLK is
clocked. According to the data-sheet, the DIN can also be used for
daisy-chaining multiple ADCs. Furthermore, DOUT can be used also for a
'data-ready' -IRQ. These modes aren't supported by this driver.

Support reading ADC scale and data from the BD79105 using SPI, when DIN
is used as a chip-select.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/6ee06d551256db9213ccbe72f44cfe9452717716.1754901948.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

...

This commit is contained in:

Matti Vaittinen 2025-08-11 11:52:22 +03:00 • committed by Jonathan Cameron

parent 261b90763f

commit 6c27bf9bbf

1 changed files with 39 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

39

drivers/iio/adc/ad7476.c

View file