arm64: dts: rockchip: add fan on rk3399-sapphire board

Browse source

The Sapphire board has a 12V fan. So, adding it to the DTS.
There is no power supply directly connected, it needs the baseboard to
work.
If the board is used standalone then a hardware modification is needed.
On the Sapphire board there is an unpopulated resistor to connect it to
VBUS_TYPEC, which is usually 5V (too low) and can range up to 20V
(too high).
I tested it for a week connected to VCC_SYS which is 8.4V and proved to
be more than enough for the required cooling needs. This is the
connection described in the comment.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

...

This commit is contained in:

Vicente Bergas 2018-09-30 17:50:33 +02:00 • committed by Heiko Stuebner

parent b0fe0f47be

commit 6d25207830

1 changed files with 38 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

38

arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi

View file