mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-14 05:55:17 +00:00
Merge series "spi: meson-spicc: add support for AXG and G12A variants" from Neil Armstrong <narmstrong@baylibre.com>:
The SPICC controller in Amlogic AXG & G12A is capable of driving the CLK/MOSI/SS signal lines through the idle state which avoid the signals floating in unexpected state, is capable of using linear clock divider to reach a much fine tuned range of clocks, while the old controller only uses a power of two clock divider, result at a more coarse clock range and finally is capable of running at 80M clock. The SPICC controller in Amlogic G12A takes the source clock from a specific clock instead of the bus clock and has a different FIFO size and doesn't handle the RX Half interrupt the same way as GXL & AXG variants. Thus the burst management is simplified and takes in account a variable FIFO size. Now the controller can support frequencies higher than 30MHz, we need the setup the I/O line delays in regard of the SPI clock frequency. Neil Armstrong (7): spi: meson-spicc: remove unused variables spi: meson-spicc: support max 80MHz clock spi: meson-spicc: add min sclk for each compatible spi: meson-spicc: setup IO line delay spi: meson-spicc: adapt burst handling for G12A support dt-bindings: spi: amlogic,meson-gx-spicc: add Amlogic G12A compatible spi: meson-spicc: add support for Amlogic G12A Sunny Luo (2): spi: meson-spicc: enhance output enable feature spi: meson-spicc: add a linear clock divider support .../bindings/spi/amlogic,meson-gx-spicc.yaml | 22 + drivers/spi/Kconfig | 1 + drivers/spi/spi-meson-spicc.c | 496 +++++++++++++----- 3 files changed, 392 insertions(+), 127 deletions(-) -- 2.22.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
This commit is contained in:
commit
7315608302
3 changed files with 392 additions and 127 deletions
Loading…
Add table
Add a link
Reference in a new issue