ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000

Browse source

We must specify the value of audmux pinctrl if we want to use pinctrl_pm().
Thus change bypass value 0x80000000 to what we exactly need.

This patch also seperately unset PUE bit for TXD so that IOMUX won't pull
up/down the pin after turning into tristate. When we use SSI normal mode to
playback monaural audio via I2S signal, there'd be a pulled curve occur to
its signal at the second slot if setting PUE bit for TXD. And it will make
the second channel to play a constant noise. So by keeping the signal level
in the second slot, we can get a constant high level signal (-1) or a low
level one (0).

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

...

This commit is contained in:

Nicolin Chen 2014-02-08 10:14:28 +08:00 • committed by Shawn Guo

parent 60e90acbca

commit 77112dd58a

3 changed files with 12 additions and 12 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

8

arch/arm/boot/dts/imx6q-sabrelite.dts

View file

8

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

View file

8

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

View file