ARM: dts: Enable USB hub on Arndale

Browse source

The Arndale has a SMSC USB3503 connected in hardware only mode like a PHY,
support it using the usb-nop-xceiv binding.

Note that due to a regrettable decision to use a regulator to represent
the reset signal this uses a fixed voltage regulator to do that, there
is a plan to use the reset controller binding once that is merged so it
does not seem worthwhile to fix the usb-nop-xceiv driver at this point.

Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

...

This commit is contained in:

Mark Brown 2013-08-19 04:33:22 +09:00 • committed by Kukjin Kim

parent e3e03f99a1

commit 7c1b0ec529

1 changed files with 14 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

14

arch/arm/boot/dts/exynos5250-arndale.dts

View file