From d28ce6c7c1ee4ca9100d6e4f3f5452e6e9a73878 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 22 Feb 2022 16:50:30 +0100 Subject: [PATCH 1/5] ARM: dts: armada-385.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With this change legacy INTA, INTB, INTC and INTD interrupts are reported separately and not mixed into one Linux virq source anymore. Signed-off-by: Pali Rohár Acked-by: Gregory CLEMENT Tested-by: Luis Mendes Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385.dtsi | 52 ++++++++++++++++++++++++++----- 1 file changed, 44 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index f0022d10c715..83392b92dae2 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -69,16 +69,25 @@ pcie1: pcie@1,0 { reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 8>; status = "disabled"; + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -88,16 +97,25 @@ pcie2: pcie@2,0 { reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -107,16 +125,25 @@ pcie3: pcie@3,0 { reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 6>; status = "disabled"; + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* @@ -129,16 +156,25 @@ pcie4: pcie@4,0 { reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 7>; status = "disabled"; + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; From 643d6a78ac76bc87cdf65183c0dec2457390b383 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Tue, 15 Feb 2022 17:39:23 +0100 Subject: [PATCH 2/5] dt-bindings: vendor-prefixes: Add Ctera Networks CTERA Networks Intl. is a company based in Israel. They manufacture NASes, network devices and provide software products for cloud storage and IT security. Signed-off-by: Pawel Dembicki Signed-off-by: Gregory CLEMENT --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 294093d45a23..dececb66b206 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -277,6 +277,8 @@ patternProperties: description: Hangzhou C-SKY Microsystems Co., Ltd "^csq,.*": description: Shenzen Chuangsiqi Technology Co.,Ltd. + "^ctera,.*": + description: CTERA Networks Intl. "^cubietech,.*": description: Cubietech, Ltd. "^cui,.*": From 5fc74dbdf8f640a7ca7fb92345ac6fbeaa078d65 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Tue, 15 Feb 2022 17:39:22 +0100 Subject: [PATCH 3/5] ARM: dts: kirkwood: Add Ctera C-200 V1 board Ctera C200 V1 is kirkwood-based 2-Bay NAS. Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 256MB (Samsung 216 K9F2G08U0C) - Lan: 1x GBE (Marvell 88E1116R-NNC1) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 2.0 port - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Signed-off-by: Pawel Dembicki Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-c200-v1.dts | 310 +++++++++++++++++++++++++ 2 files changed, 311 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-c200-v1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 235ad559acb2..31616f6ae173 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -281,6 +281,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ kirkwood-blackarmor-nas220.dtb \ + kirkwood-c200-v1.dtb \ kirkwood-cloudbox.dtb \ kirkwood-d2net.dtb \ kirkwood-db-88f6281.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-c200-v1.dts b/arch/arm/boot/dts/kirkwood-c200-v1.dts new file mode 100644 index 000000000000..f59ff7578dfc --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Ctera C200 V1 Board Description + * Copyright 2021-2022 Pawel Dembicki + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include + +/ { + model = "Ctera C200 V1"; + compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + + power { + label = "Power Button"; + linux,code = ; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + + usb1 { + label = "USB1 Button"; + linux,code = ; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "USB2 Button"; + linux,code = ; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds>; + pinctrl-names = "default"; + + led-0 { + function = LED_FUNCTION_DISK; + function-enumerator = <2>; + color = ; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-1 { + function = LED_FUNCTION_DISK; + function-enumerator = <1>; + color = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-2 { + function = LED_FUNCTION_DISK; + function-enumerator = <2>; + color = ; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + led-3 { + function = LED_FUNCTION_DISK; + function-enumerator = <1>; + color = ; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + led-5 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + led-6 { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led-7 { + function = LED_FUNCTION_DISK_ERR; + color = ; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + led-8 { + function = LED_FUNCTION_DISK_ERR; + color = ; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + led-9 { + function = LED_FUNCTION_USB; + function-enumerator = <1>; + color = ; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + led-10 { + function = LED_FUNCTION_USB; + function-enumerator = <1>; + color = ; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port2>; + }; + + led-11 { + function = LED_FUNCTION_USB; + function-enumerator = <2>; + color = ; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + led-12 { + function = LED_FUNCTION_USB; + function-enumerator = <2>; + color = ; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port1>; + }; + }; +}; + +ð0 { + status = "okay"; +}; + +ð0port { + phy-handle = <ðphy9>; +}; + +&i2c0 { + status = "okay"; + + rtc@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + + lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; +}; + +&mdio { + status = "okay"; + + ethphy9: ethernet-phy@9 { + reg = <9>; + }; +}; + +&nand { + status = "okay"; + chip-delay = <40>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x200000>; + }; + + partition@200000 { + label = "certificate"; + reg = <0x0200000 0x100000>; + }; + + partition@300000 { + label = "preset_cfg"; + reg = <0x0300000 0x100000>; + }; + + partition@400000 { + label = "dev_params"; + reg = <0x0400000 0x100000>; + }; + + partition@500000 { + label = "active_bank"; + reg = <0x0500000 0x0100000>; + }; + + partition@600000 { + label = "magic"; + reg = <0x0600000 0x0100000>; + }; + + partition@700000 { + label = "bank1"; + reg = <0x0700000 0x2800000>; + }; + + partition@2f00000 { + label = "bank2"; + reg = <0x2f00000 0x2800000>; + }; + + /* 0x5700000-0x5a00000 undefined in vendor firmware */ + + partition@5a00000 { + label = "reserved"; + reg = <0x5a00000 0x2000000>; + }; + + partition@7a00000 { + label = "rootfs"; + reg = <0x7a00000 0x8600000>; + }; +}; + +&pinctrl { + /* Buzzer gpios are connected to two pins of buzzer. + * This buzzer require a modulated signal from gpio. + * Leave it as is due lack of proper driver. + */ + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp12", "mpp13"; + marvell,function = "gpio"; + }; + + pmx_leds: pmx-leds { + marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38", + "mpp39", "mpp40", "mpp42", "mpp43", "mpp44", + "mpp45", "mpp46", "mpp47"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49"; + marvell,function = "gpio"; + }; + + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + #trigger-source-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + hub_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; +}; From 8cd235b2160579aee90bcf4448f213dc1d6c5cc1 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Wed, 16 Feb 2022 12:43:09 +0100 Subject: [PATCH 4/5] ARM: dts: mvebu: Add Ctera C-200 V2 board Ctera C200 V2 is armada-370 based 2-Bay NAS. Hardware: - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC) - Ram: 1GB (2x Nanya NT5CC512M8DN-D1) - NAND Flash: 256MB (ESMT F59L2G81A-25T) - Lan: 1x GBE (Marvell 88E1318-NNB2) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 3.0 port (Renesas uPD720202) - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Signed-off-by: Pawel Dembicki Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-370-c200-v2.dts | 388 +++++++++++++++++++++++ 2 files changed, 389 insertions(+) create mode 100644 arch/arm/boot/dts/armada-370-c200-v2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 31616f6ae173..bc7b3aac8135 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1416,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zybo.dtb \ zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ + armada-370-c200-v2.dtb \ armada-370-db.dtb \ armada-370-dlink-dns327l.dtb \ armada-370-mirabox.dtb \ diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts new file mode 100644 index 000000000000..1a4a09bdde63 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-c200-v2.dts @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Device Tree file for Ctera C200-V2 + * + * Copyright (C) 2022 Pawel Dembicki + */ + +/dts-v1/; + +#include "armada-370.dtsi" +#include +#include +#include +#include + +/ { + model = "Ctera C200 V2"; + compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1024 MB */ + }; + + soc { + ranges = ; + }; + + thermal-zones { + ethphy-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <ðphy0>; + + trips { + ethphy_alert1: trip1 { + temperature = <65000>; + hysteresis = <4000>; + type = "passive"; + }; + + ethphy_crit: trip2 { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + beeper { + compatible = "pwm-beeper"; + pinctrl-0 = <&pmx_beeper>; + pinctrl-names = "default"; + pwms = <&gpio1 31 4000>; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + + power { + label = "Power Button"; + linux,code = ; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + usb1 { + label = "USB1 Button"; + linux,code = ; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "USB2 Button"; + linux,code = ; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds1 &pmx_leds2>; + pinctrl-names = "default"; + + led-0 { + function = LED_FUNCTION_USB; + function-enumerator = <2>; + color = ; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + led-1 { + function = LED_FUNCTION_USB; + function-enumerator = <2>; + color = ; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + led-2 { + function = LED_FUNCTION_USB; + function-enumerator = <1>; + color = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-3 { + function = LED_FUNCTION_USB; + function-enumerator = <1>; + color = ; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + led-4 { + function = LED_FUNCTION_DISK; + function-enumerator = <2>; + color = ; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + led-5 { + function = LED_FUNCTION_DISK; + function-enumerator = <1>; + color = ; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + }; + + led-6 { + function = LED_FUNCTION_DISK; + function-enumerator = <2>; + color = ; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + }; + + led-7 { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + }; + + led-8 { + function = LED_FUNCTION_DISK_ERR; + color = ; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + }; + + led-9 { + function = LED_FUNCTION_DISK_ERR; + color = ; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + }; + + led-10 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + }; + + led-11 { + function = LED_FUNCTION_DISK; + function-enumerator = <1>; + color = ; + gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + }; + + led-12 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&coherencyfab { + broken-idle; +}; + +ð1 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + status = "okay"; + + hwmon@2a { + compatible = "nuvoton,nct7802"; + reg = <0x2a>; + }; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + #thermal-sensor-cells = <0>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x200000>; + read-only; + }; + + partition@200000 { + label = "certificate"; + reg = <0x0200000 0x100000>; + read-only; + }; + + partition@300000 { + label = "preset_cfg"; + reg = <0x0300000 0x100000>; + read-only; + }; + + partition@400000 { + label = "dev_params"; + reg = <0x0400000 0x100000>; + read-only; + }; + partition@500000 { + label = "active_bank"; + reg = <0x0500000 0x0100000>; + }; + + partition@600000 { + label = "magic"; + reg = <0x0600000 0x0100000>; + read-only; + }; + + partition@700000 { + label = "bank1"; + reg = <0x0700000 0x2800000>; + }; + + partition@2f00000 { + label = "bank2"; + reg = <0x2f00000 0x2800000>; + }; + + /* 0x5700000-0x5a00000 undefined in vendor firmware */ + + partition@5a00000 { + label = "reserved"; + reg = <0x5a00000 0x2000000>; + }; + + partition@7a00000 { + label = "rootfs"; + reg = <0x7a00000 0x8600000>; + }; + }; + }; +}; + +&pciec { + status = "okay"; + + pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */ + pinctrl-0 = <&pmx_pcie>; + pinctrl-names = "default"; + status = "okay"; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_power_cpu: pmx-power-cpu { + marvell,pins = "mpp4"; + marvell,function = "vdd"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32"; + marvell,function = "gpio"; + }; + + pmx_leds1: pmx-leds1 { + marvell,pins = "mpp47"; + marvell,function = "gpo"; + }; + + pmx_leds2: pmx-leds2 { + marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51", + "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58"; + marvell,function = "gpio"; + }; + + pmx_pcie: pmx-pcie { + marvell,pins = "mpp59"; + marvell,function = "gpio"; + }; + + pmx_beeper: pmx-beeper { + marvell,pins = "mpp63"; + marvell,function = "gpio"; + }; +}; + +&pmsu { + pinctrl-0 = <&pmx_power_cpu>; + pinctrl-names = "default"; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + nr-ports = <2>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + hdd0_temp: sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; + + hdd1_temp: sata-port@1 { + reg = <1>; + #thermal-sensor-cells = <0>; + }; +}; + +&uart0 { + status = "okay"; +}; From c4deb8344a76831879540f3bd9c0b3cdc1d4b2ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 22 Feb 2022 17:31:58 +0100 Subject: [PATCH 5/5] ARM: dts: turris-omnia: Set PCIe slot-power-limit-milliwatt properties MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All 3 miniPCIe slots in Turris Omnia are designed for 10 W. Signed-off-by: Pali Rohár Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 5bd6a66d2c2b..f240018148f6 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -71,16 +71,19 @@ pcie { pcie@1,0 { /* Port 0, Lane 0 */ status = "okay"; + slot-power-limit-milliwatt = <10000>; }; pcie@2,0 { /* Port 1, Lane 0 */ status = "okay"; + slot-power-limit-milliwatt = <10000>; }; pcie@3,0 { /* Port 2, Lane 0 */ status = "okay"; + slot-power-limit-milliwatt = <10000>; }; }; };