mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-14 05:55:17 +00:00
This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11,
please pull the following changes: - Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since every device found out there has it enabled by default. He also fixes the LED definitions for the Luxul XWR-3100 device, enables USB controllers and their respective PHY devices, specifies the correct GPIO to power on USB HUBs, adds the additional RAM bank for somes devices, and finally sets the correct 5Ghz frequency limits on the Netgear R8000 - Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports to the BCM958625K reference board, enables 3rd Ethernet MAC instance to relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC support to the XMC board - Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files ands enables it on the relevant boards - Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both BCM47081 based SoCs -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJYgBUvAAoJEIfQlpxEBwcED8sQAJxH/wTLvHkXxbc1sXeizGW9 FKxRnYR0gvUAm1skSttw8OADQzYcSa3frNh4sV3X9dV1SqzSzaRJP5hjBlzxIQdJ 72TJC8t7tFbjNBOG/fVqei8yAtgu/VjOP7Co8oLlON9EX1A2nsFgHQfOM7pJWdkR mzaWQr/PI1+Jp3DFRVG/G503ummxN4SR6MG+37juW9ip446N9asT4e7eeRZkkGtD uXtPn34sS3Pp2CN/4wFrG9Y6NRs4eVdaw+VNjelSRbhgBzFzSJVr255fHpazq5xw UwUMsfYv1gBhvzMoHCyAohF7nTIll7rMqoPBsjawlbkaCV1UYkA0fG/fRZ7oDuU4 5BZoztqRzr0XRi95ssfuzb9A1aXa2Et15XAvcKL+ZwqSU6LNPe9alNV3TjQEoAFX 713owKbAiKA0ACtiRlOgRG9TlcE86u4XCh0IpDhLwsyVl02BzASLpX9x61Ztg2FS HsZlXUDFL2e9lFrz9ECqvWcZGGDKZDovLWXWNUebe0L1LEoSB4+lQvMJ1kYGupP4 ceVROUhB5DiTHHxPrg2bpaYSSLA/GMvvA8A/peDPGxxh7vQMy9ZPT7ows4k/q4Gl jsnUW6ukOUaiMRbwbh2cAqBVDxvz733FZhYils2Q/FgZBfiVBDOia6JQqfsBvHvY jZ0kzHgxCg5gKuZ2+sZ4 =wFmP -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-4.11/devicetree' of http://github.com/Broadcom/stblinux into next/dt This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11, please pull the following changes: - Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since every device found out there has it enabled by default. He also fixes the LED definitions for the Luxul XWR-3100 device, enables USB controllers and their respective PHY devices, specifies the correct GPIO to power on USB HUBs, adds the additional RAM bank for somes devices, and finally sets the correct 5Ghz frequency limits on the Netgear R8000 - Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports to the BCM958625K reference board, enables 3rd Ethernet MAC instance to relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC support to the XMC board - Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files ands enables it on the relevant boards - Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both BCM47081 based SoCs * tag 'arm-soc/for-4.11/devicetree' of http://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi ARM: dts: BCM5301X: Add DT for Luxul XWR-1200 ARM: dts: BCM5301X: Add DT for Luxul XAP-1410 ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000 ARM: dts: NSP: Add SD/MMC support ARM: dts: NSP: Add Ethernet to NSP XMC ARM: dts: NSP: Add and enable amac2 ARM: dts: NSP: Add BCM958625K switch ports ARM: dts: NSP: Add QSPI support to missing boards ARM: dts: NSP: Correct NAND partition unit address ARM: dts: NSP: DT Clean-ups ARM: dts: BCM53573: Specify USB ports of on-SoC controllers ARM: dts: BCM5301X: Specify all RAM by including an extra block ARM: dts: BCM5301X: Set GPIO enabling USB power on Netgear R7000 ARM: dts: BCM5301X: Specify USB controllers in DT ARM: dts: BCM5301X: Fix LAN LED labels for Luxul XWR-3100 ARM: dts: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
828a34b94c
43 changed files with 813 additions and 172 deletions
Loading…
Add table
Add a link
Reference in a new issue