net: stmmac: qcom-ethqos: move loopback disable to .mac_finish()

Browse source

Loopback is enabled to allow the dwmac soft reset to succeed. This
is enabled when clocks are enabled in ethqos_clks_config(), which
happens at driver probe and runtime PM resume - e.g. when the
network device is administratively brought up.

Currently, the loopback is disabled when the link comes up (via
.mac_link_up() calling this driver's .fix_mac_speed().)

Move the qcom_ethqos_set_sgmii_loopback() call which disables
loopback from ethqos_fix_mac_speed() into ethqos' SerDes specific
.mac_finish() method so that loopback is disabled a little earlier
after reset has completed, and dwmac setup has completed.

Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKq-0000000AScA-1Wh3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

...

This commit is contained in:

Russell King (Oracle) 2026-02-23 09:34:36 +00:00 • committed by Jakub Kicinski

parent 3baa791f19

commit 834c72ca30

1 changed files with 12 additions and 1 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

13

drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c

View file