riscv: dts: spacemit: k1-musepi-pro: add SD card support with UHS modes

Browse source

Update the Muse Pi Pro devicetree with SD card support to match what
was done for the OrangePi RV2 in [1]. More precisely:

- Enable sdhci0 controller with 4-bit bus width
- Configure card detect GPIO with internal pull-up support
- Connect vmmc-supply to buck4 for 3.3V card power
- Connect vqmmc-supply to aldo1 for 1.8V/3.3V I/O switching
- Add dual pinctrl states for voltage-dependent pin configuration
- Support UHS-I SDR25, SDR50, and SDR104 modes
- Add stable MMC device aliases (mmc0 = eMMC, mmc1 = SD card)

[1] https://lore.kernel.org/linux-riscv/20260316-orangepi-sd-card-uhs-v3-0-aefd3b7832df@gmail.com/T/#

Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Andre Heider <a.heider@gmail.com>
Link: https://lore.kernel.org/linux-riscv/20260316-orangepi-sd-card-uhs-v3-0-aefd3b7832df@gmail.com/T/#
Link: https://patch.msgid.link/20260520130624.1763487-1-a.heider@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>

...

This commit is contained in:

Trevor Gamblin 2026-05-20 15:06:23 +02:00 • committed by Yixun Lan

parent 844c291973

commit 85e4c5733c

1 changed files with 21 additions and 1 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

22

arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts

View file