arm64: dts: freescale: add support for SolidRun i.MX8MP HummingBoard IIoT

Browse source

Introduce support for the SolidRun i.MX8MP HummingBoard IIoT platform.
This board is a new design based on the i.MX8MP System on Module and
does not share much hardware with previous HummingBoard variants.

It comes with some common features:
- 3x USB-3.0 Type A connector
- 2x 1Gbps RJ45 Ethernet
- USB Type-C Console Port
- microSD connector
- RTC with backup battery
- RGB Status LED
- 1x M.2 M-Key connector with PCI-E Gen. 3 x1
- 1x M.2 B-Key connector with USB-2.0/3.0 + SIM card holder
- 1x LVDS Display Connector
- 1x DSI Display Connector
- GPIO header
- 2x RS232/RS485 ports (configurable)
- 2x CAN

In addition there is a board-to-board expansion connector to support
custom daughter boards with access to SPI, a range of GPIOs and -
notably - CAN and UART. Both 2x CAN and 2x UART can be muxed either
to this b2b connector, or a terminal block connector on the base board.

The routing choice for UART and CAN is expressed through gpio
mux-controllers in DT and can be changed by applying dtb overlays.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

...

This commit is contained in:

Josua Mayer 2026-03-13 14:30:57 +02:00 • committed by Frank Li

parent b06c76fcd8

commit 8da7bfdcda

2 changed files with 718 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

2

arch/arm64/boot/dts/freescale/Makefile

View file

716

arch/arm64/boot/dts/freescale/imx8mp-hummingboard-iiot.dts

View file