Arm FF-A updates for v6.10

1. Support for handling notification pending interrupt(NPI)
 
    The FF-A uses the notification pending interrupt to inform the receiver
    that it has a pending notification. This is a virtual interrupt and is
    used by the following type of receivers:
    - A guest/VM running under a hypervisor(normal world usecase)
    - An S-EL1 SP running under a S-EL2 SPMC(secure world only usecase)
 
    Also, when the FF-A driver is running inside a guest VM under an
    hypervisor, the driver/guest VM doesn't have the permission/capability
    to request the creation of notification bitmaps. For a VM, the hypervisor
    reserves memory for its VM and hypervisor framework notification bitmaps
    and the SPMC reserves memory for its SP and SPMC framework notification
    bitmaps before the hypervisor initializes it.
 
    These changes include skipping of creation of notification bitmaps, some
    refactoring around schedule receiver interrupt(SRI) handling and addition
    of support for NPI.
 
 2. Support for FF-A indirect messaging
 
    The FFA_MSG_SEND2 can be used to transmit a partition message from
    the Tx buffer of the sender(the driver in this case) endpoint to the Rx
    buffer of the receiver endpoint and inform the scheduler that the
    receiver endpoint must be run.
 
 Apart from these two main features, there is an optimisation to avoid
 queuing of a work when already running on the worker queue.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmYqYlMACgkQAEG6vDF+
 4piZdg//bXofMTqAzCgCJzzgCHnmPmAvoCk0cDzogorQ4rlZpabYOGMkVGeWIh+x
 p3fy/tD5HNl+AgAiglWDmchphxiqhxrMyb893oSsUUr7WHH2xeb8cLUlMrirGCMD
 CDUQ2mAv1h09pSvHfCLcJD4MVHUZ8maHCo5Bqg5zqMYV7poOSoUJJ/nHCWSHG2il
 S5h4ScEgtJNd7FmsnieSnTXwUKa7TXbVDWbUAhxukymAfJfQcwJ9XP8X537W/NkJ
 1UH4asPadU/ScRi6egNpaledEWiVM2Z1emsItfd3oO399lCHIBb9o5XDZg3TWaEi
 JEbKaBt6EP0g2zt4Rdjk/vPWIAwZKmnOLi1m+Cn+urZbsNBXke/7e5C1TvdXrFLA
 9D0vDmO6CMnIZ+wPt/xElzsnWKGNJ3tRu5kGPAL5XpnsbsY6NLbkQ//veS2GCeyW
 XYQBmd2V6nU9IB1tmRQmrtM01DbT4V02tDROaviRWgt9GrZFdBSV+uYNZ9wOVXej
 LhGuSW0ouaNt6PwjxdoocFZh4cfVHGwZdtNVJNOeRRtMok2LweKM16CMtN8RexSl
 QBTsHifZ0hCg+QZ9Cp2ka7nenpuVhll1dB/MmKENJWLfnn5+UMEbGoIGj/5cRn91
 aYuYC3f6qnZsgWCn/hfglP4jrl0pP6/OrblFBZPZRl0IoCjgfHE=
 =A2PF
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYwCOEACgkQYKtH/8kJ
 Uifhkw/9FJUVel9Q84ZoovQH+L6D18pB6tOSy4BtrX/YujQ6tSlKhhQAhbl/d02s
 E4fUbkQDRLJIMDmfiqLJS7oFjV5ao6ws8ERwTtiaWQN30cMkTmmGVVTjPB2hXMyY
 Iez1CKT4UBncJQZdFj3JsSu0OPqWAtmi1RviRpyW/7/4ezpnvgawkmGKNDDJFgAI
 uXgO0nsZFkbFSSZTJyeWNvb4fwQdflgJgUZ3d3jozFTQDB+g/N+89yYHKFYWZ5Yf
 fJ/u3e4y/3Ap4oBhQ6D7WIcMX4flQNyQzlubOjO3Zro0/rWY3/LetcvtwaulzCNd
 28hDe7RxulflRgrNuRERzuM2uT0Wuy33NCX3CNbCTw3lc1PPk4g0WEXlIPFtv/q2
 5RcAiGeHP++u4qfFgxr2eutxPrWPBbVUxRpqL1jxawKSLDjxj0YMnDO+2A6QUyei
 cDGtn0jjTFbUaeprw8Kn7AqsOpQoCW4nhRYA7FIH8xn4HyP4ibGB3PAEZZ8WQ6ny
 cGG+sVPK82njXQW7PmIqkoAEmZLwp8yqt6esZuQ8ZY7LmTXiPgYaZ5L6l4dQEY9C
 13cfiEyCKH0qsCGiTuDD3FTnDH8NmIzcCuhL6BaYicvc1tlgfakDr+ib8u03tEhI
 iSQq9hLnF51tcEVlbKKvKvZ+kVEtQy5RyyNVRsvIRINEM/Y9uro=
 =Mf+D
 -----END PGP SIGNATURE-----

Merge tag 'ffa-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

Arm FF-A updates for v6.10

1. Support for handling notification pending interrupt(NPI)

   The FF-A uses the notification pending interrupt to inform the receiver
   that it has a pending notification. This is a virtual interrupt and is
   used by the following type of receivers:
   - A guest/VM running under a hypervisor(normal world usecase)
   - An S-EL1 SP running under a S-EL2 SPMC(secure world only usecase)

   Also, when the FF-A driver is running inside a guest VM under an
   hypervisor, the driver/guest VM doesn't have the permission/capability
   to request the creation of notification bitmaps. For a VM, the hypervisor
   reserves memory for its VM and hypervisor framework notification bitmaps
   and the SPMC reserves memory for its SP and SPMC framework notification
   bitmaps before the hypervisor initializes it.

   These changes include skipping of creation of notification bitmaps, some
   refactoring around schedule receiver interrupt(SRI) handling and addition
   of support for NPI.

2. Support for FF-A indirect messaging

   The FFA_MSG_SEND2 can be used to transmit a partition message from
   the Tx buffer of the sender(the driver in this case) endpoint to the Rx
   buffer of the receiver endpoint and inform the scheduler that the
   receiver endpoint must be run.

Apart from these two main features, there is an optimisation to avoid
queuing of a work when already running on the worker queue.

* tag 'ffa-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_ffa: Avoid queuing work when running on the worker queue
  firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
  firmware: arm_ffa: Add support for FFA_MSG_SEND2
  firmware: arm_ffa: Stash the partition properties for query purposes
  firmware: arm_ffa: Fix kernel warning about incorrect SRI/NPI
  firmware: arm_ffa: Add support for handling notification pending interrupt(NPI)
  firmware: arm_ffa: Refactor SRI handling in prepartion to add NPI support
  firmware: arm_ffa: Skip creation of the notification bitmaps

Link: https://lore.kernel.org/r/20240426105051.1527016-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2024-04-29 22:53:53 +02:00
commit 93f9f5a489
2 changed files with 169 additions and 45 deletions