drm/imagination: Handle Rogue safety event IRQs

Browse source

Extend interrupt handling logic to check for safety event IRQs, then clear
and handle them in the IRQ handler thread.

Safety events need to be checked and cleared with a different set of GPU
registers than those the IRQ handler has been using so far.

Only two safety events need to be handled on the host: FW fault (ECC error
correction or detection) and device watchdog timeout. Handling right now
simply consists of clearing any error and logging the event. If either of
these events results in an unrecoverable GPU or FW, the driver will
eventually attempt to recover from it e.g. via pvr_power_reset().

Note that Rogue GPUs may send interrupts to the host for all types of
safety events, not just the two above. For events not handled by the host,
clearing the associated interrupt is sufficient.

Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-7-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>

...

This commit is contained in:

Alessio Belle 2025-04-10 10:55:06 +01:00 • committed by Matt Coster

parent bdced61365

commit 96822d38ff

No known key found for this signature in database

GPG key ID: 79BC19F3D9DE6AB0

3 changed files with 117 additions and 2 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

113

drivers/gpu/drm/imagination/pvr_device.c

View file

3

drivers/gpu/drm/imagination/pvr_device.h

View file

3

drivers/gpu/drm/imagination/pvr_fw.c

View file