From 96873527fc5fb1bb7b3280bfea89fe40551bbaa2 Mon Sep 17 00:00:00 2001 From: Tudor Ambarus Date: Fri, 5 Jun 2026 14:31:14 -0400 Subject: [PATCH] tty: serial: samsung: use u32 for register interactions [ Upstream commit 032a725c16add79332d774348d7ad7d0d4b86479 ] All registers of the IP have 32 bits. Use u32 variables when reading or writing from/to the registers. The purpose of those variables becomes clearer. Reviewed-by: Sam Protsenko Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20240119104526.1221243-9-tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: a3bb136bff5e ("tty: serial: samsung: Remove redundant port lock acquisition in rx helpers") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung_tty.c | 44 +++++++++++++++----------------- 1 file changed, 21 insertions(+), 23 deletions(-) diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 5f05336b4485..e83e39ea176a 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -243,8 +243,8 @@ static void s3c24xx_serial_rx_enable(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ucon, ufcon; int count = 10000; + u32 ucon, ufcon; uart_port_lock_irqsave(port, &flags); @@ -267,7 +267,7 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ucon; + u32 ucon; uart_port_lock_irqsave(port, &flags); @@ -664,7 +664,7 @@ static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) static void enable_rx_dma(struct s3c24xx_uart_port *ourport) { struct uart_port *port = &ourport->port; - unsigned int ucon; + u32 ucon; /* set Rx mode to DMA mode */ ucon = rd_regl(port, S3C2410_UCON); @@ -687,7 +687,7 @@ static void enable_rx_dma(struct s3c24xx_uart_port *ourport) static void enable_rx_pio(struct s3c24xx_uart_port *ourport) { struct uart_port *port = &ourport->port; - unsigned int ucon; + u32 ucon; /* set Rx mode to DMA mode */ ucon = rd_regl(port, S3C2410_UCON); @@ -712,13 +712,14 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport); static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) { - unsigned int utrstat, received; struct s3c24xx_uart_port *ourport = dev_id; struct uart_port *port = &ourport->port; struct s3c24xx_uart_dma *dma = ourport->dma; struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); struct tty_port *t = &port->state->port; struct dma_tx_state state; + unsigned int received; + u32 utrstat; utrstat = rd_regl(port, S3C2410_UTRSTAT); rd_regl(port, S3C2410_UFSTAT); @@ -1000,7 +1001,7 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) /* no modem control lines */ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) { - unsigned int umstat = rd_reg(port, S3C2410_UMSTAT); + u32 umstat = rd_reg(port, S3C2410_UMSTAT); if (umstat & S3C2410_UMSTAT_CTS) return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; @@ -1023,7 +1024,7 @@ static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) { unsigned long flags; - unsigned int ucon; + u32 ucon; uart_port_lock_irqsave(port, &flags); @@ -1204,7 +1205,7 @@ static void apple_s5l_serial_shutdown(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned int ucon; + u32 ucon; ucon = rd_regl(port, S3C2410_UCON); ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | @@ -1272,7 +1273,7 @@ static int s3c64xx_serial_startup(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ufcon; + u32 ufcon; int ret; wr_regl(port, S3C64XX_UINTM, 0xf); @@ -1317,7 +1318,7 @@ static int apple_s5l_serial_startup(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ufcon; + u32 ufcon; int ret; wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); @@ -1559,9 +1560,8 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, struct clk *clk = ERR_PTR(-EINVAL); unsigned long flags; unsigned int baud, quot, clk_sel = 0; - unsigned int ulcon; - unsigned int umcon; unsigned int udivslot = 0; + u32 ulcon, umcon; /* * We don't support modem control lines. @@ -2147,7 +2147,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, wr_regl(port, S3C64XX_UINTSP, 0xf); break; case TYPE_APPLE_S5L: { - unsigned int ucon; + u32 ucon; ucon = rd_regl(port, S3C2410_UCON); ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | @@ -2366,7 +2366,7 @@ static int s3c24xx_serial_resume_noirq(struct device *dev) /* restore IRQ mask */ switch (ourport->info->type) { case TYPE_S3C6400: { - unsigned int uintm = 0xf; + u32 uintm = 0xf; if (ourport->tx_enabled) uintm &= ~S3C64XX_UINTM_TXD_MSK; @@ -2382,7 +2382,7 @@ static int s3c24xx_serial_resume_noirq(struct device *dev) break; } case TYPE_APPLE_S5L: { - unsigned int ucon; + u32 ucon; int ret; ret = clk_prepare_enable(ourport->clk); @@ -2445,7 +2445,7 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { static struct uart_port *cons_uart; static int -s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) +s3c24xx_serial_console_txrdy(struct uart_port *port, u32 ufcon) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned long ufstat, utrstat; @@ -2464,7 +2464,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) } static bool -s3c24xx_port_configured(unsigned int ucon) +s3c24xx_port_configured(u32 ucon) { /* consider the serial port configured if the tx/rx mode set */ return (ucon & 0xf) != 0; @@ -2491,8 +2491,8 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port) static void s3c24xx_serial_put_poll_char(struct uart_port *port, unsigned char c) { - unsigned int ufcon = rd_regl(port, S3C2410_UFCON); - unsigned int ucon = rd_regl(port, S3C2410_UCON); + u32 ufcon = rd_regl(port, S3C2410_UFCON); + u32 ucon = rd_regl(port, S3C2410_UCON); /* not possible to xmit on unconfigured port */ if (!s3c24xx_port_configured(ucon)) @@ -2508,7 +2508,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, static void s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { - unsigned int ufcon = rd_regl(port, S3C2410_UFCON); + u32 ufcon = rd_regl(port, S3C2410_UFCON); while (!s3c24xx_serial_console_txrdy(port, ufcon)) cpu_relax(); @@ -2533,11 +2533,9 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { struct clk *clk; - unsigned int ulcon; - unsigned int ucon; - unsigned int ubrdiv; unsigned long rate; unsigned int clk_sel; + u32 ulcon, ucon, ubrdiv; char clk_name[MAX_CLK_NAME_LENGTH]; ulcon = rd_regl(port, S3C2410_ULCON);