From cce96d1883dae4b79f44890e5118243d806da286 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Wed, 11 Apr 2018 15:23:24 +0300 Subject: [PATCH 1/2] net: aquantia: Regression on reset with 1.x firmware On ASUS XG-C100C with 1.5.44 firmware a special mode called "dirty wake" is active. With this mode when motherboard gets powered (but no poweron happens yet), NIC automatically enables powersave link and watches for WOL packet. This normally allows to powerup the PC after AC power failures. Not all motherboards or bios settings gives power to PCI slots, so this mode is not enabled on all the hardware. 4.16 linux driver introduced full hardware reset sequence This is required since before that we had no NIC hardware reset implemented and there were side effects of "not clean start". But this full reset is incompatible with "dirty wake" WOL feature it keeps the PHY link in a special mode forever. As a consequence, driver sees no link and no traffic. To fix this we forcibly change FW state to idle state before doing the full reset. This makes FW to restore link state. Fixes: c8c82eb net: aquantia: Introduce global AQC hardware reset sequence Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- .../aquantia/atlantic/hw_atl/hw_atl_utils.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c index 84d7f4dd4ce1..e652d86b87d4 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c @@ -48,6 +48,8 @@ #define FORCE_FLASHLESS 0 static int hw_atl_utils_ver_match(u32 ver_expected, u32 ver_actual); +static int hw_atl_utils_mpi_set_state(struct aq_hw_s *self, + enum hal_atl_utils_fw_state_e state); int hw_atl_utils_initfw(struct aq_hw_s *self, const struct aq_fw_ops **fw_ops) { @@ -247,6 +249,20 @@ int hw_atl_utils_soft_reset(struct aq_hw_s *self) self->rbl_enabled = (boot_exit_code != 0); + /* FW 1.x may bootup in an invalid POWER state (WOL feature). + * We should work around this by forcing its state back to DEINIT + */ + if (!hw_atl_utils_ver_match(HW_ATL_FW_VER_1X, + aq_hw_read_reg(self, + HW_ATL_MPI_FW_VERSION))) { + int err = 0; + + hw_atl_utils_mpi_set_state(self, MPI_DEINIT); + AQ_HW_WAIT_FOR((aq_hw_read_reg(self, HW_ATL_MPI_STATE_ADR) & + HW_ATL_MPI_STATE_MSK) == MPI_DEINIT, + 10, 1000U); + } + if (self->rbl_enabled) return hw_atl_utils_soft_reset_rbl(self); else From 9a11aff25fd43d5bd2660ababdc9f564b0ba183a Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Wed, 11 Apr 2018 15:23:25 +0300 Subject: [PATCH 2/2] net: aquantia: oops when shutdown on already stopped device In case netdev is closed at the moment of pci shutdown, aq_nic_stop gets called second time. napi_disable in that case hangs indefinitely. In other case, if device was never opened at all, we get oops because of null pointer access. We should invoke aq_nic_stop conditionally, only if device is running at the moment of shutdown. Reported-by: David Arcari Fixes: 90869ddfefeb ("net: aquantia: Implement pci shutdown callback") Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index c96a92118b8b..32f6d2e24d66 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -951,9 +951,11 @@ void aq_nic_shutdown(struct aq_nic_s *self) netif_device_detach(self->ndev); - err = aq_nic_stop(self); - if (err < 0) - goto err_exit; + if (netif_running(self->ndev)) { + err = aq_nic_stop(self); + if (err < 0) + goto err_exit; + } aq_nic_deinit(self); err_exit: