mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-14 05:55:17 +00:00
i.MX arm64 device tree chagnes for 5.14:
- New board support: i.MX8MM Gateworks GW7901 board. - Add SPBA bus description for i.MX8MN and i.MX8MM. - A series of update on imx8mq-nitrogen board to add USB OTG/Host and LT8912 MIPI-DSI to HDMI support. - Correct enet clock description for i.MX8 Connection Subsystem. - A couple of patches from Heiko Schocher to add FlexSPI device for i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som. - Remove the reference to audio IPG clock on i.MX8MP. - Enable EQOS Ethernet and PMIC device support for imx8mp-evk. - Disable USB over-current on imx8mm-evk and imx8mn-evk. - Add dma-ranges description for i.MX8MM and i.MX8MN SoC. - Add PCIe clock description for i.MX8MQ SoC. - Enable PCIe support on freeway board. - Enable OPTEE support on ls1028a-rdb board. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmDFvn4UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5v7Qf/QbcMDnuc3phG9SvVY2HYRhJwQqr+ Fj6bXtPZAtk6knPjdhuxhtbLqDbZoDaJGOYaZE2itJpSfMIRZHgk5gb+fz4caZvC ZS4nefLmjAlyctlVaDpDwUGQVis+7BfwnsY7HVqbbqJDXjC0bNL0iQvcvIKjDDdg aXirBcpZvRtdkXvXG2QdUZJmTjnLnDKe9oM6AP6Ernami5n3yX7VT9AyJfKQoEra 9A6Y+sGol65W8S2qVcpPxWfSSoiRHSKKuSlOHpeRaIALRCz0WgyIvvB1NsY1lTBt VkhLq5ySI+AnHJwvBUn6R10cV8Lx4rUOi3Q4EtH/Sg7dtiK+UKKa2YmTxg== =seFj -----END PGP SIGNATURE----- Merge tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree chagnes for 5.14: - New board support: i.MX8MM Gateworks GW7901 board. - Add SPBA bus description for i.MX8MN and i.MX8MM. - A series of update on imx8mq-nitrogen board to add USB OTG/Host and LT8912 MIPI-DSI to HDMI support. - Correct enet clock description for i.MX8 Connection Subsystem. - A couple of patches from Heiko Schocher to add FlexSPI device for i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som. - Remove the reference to audio IPG clock on i.MX8MP. - Enable EQOS Ethernet and PMIC device support for imx8mp-evk. - Disable USB over-current on imx8mm-evk and imx8mn-evk. - Add dma-ranges description for i.MX8MM and i.MX8MN SoC. - Add PCIe clock description for i.MX8MQ SoC. - Enable PCIe support on freeway board. - Enable OPTEE support on ls1028a-rdb board. * tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits) arm64: dts: imx8mn-evk: disable over current for usb arm64: dts: imx8mm-evk: disable over current for usb1 arm64: dts: freescale: Separate each group of data in the property 'reg' arm64: dts: imx8: conn: fix enet clock setting arm64: dts: imx8mq: assign PCIe clocks arm64: dts: imx8mn: specify dma-ranges arm64: dts: imx8mm: specify dma-ranges arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges arm64: dts: imx8mn-beacon-som: Assign PMIC clock arm64: dts: ls208xa: remove bus-num from dspi node arm64: dts: ls1012a: enable PCIe on freeway board arm64: dts: imx8mp-evk: enable EQOS ethernet arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy arm64: dts: imx8mm: Add spba1 and spba2 buses arm64: dts: imx8mn: Add spba1 bus arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI arm64: dts: imx8mq-nitrogen: add USB HOST support arm64: dts: imx8mq-nitrogen: add USB OTG support arm64: dts: imx8mp-phycore-som: enable spi nor ... Link: https://lore.kernel.org/r/20210613082544.16067-5-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
commit
989e7e357c
25 changed files with 1789 additions and 340 deletions
Loading…
Add table
Add a link
Reference in a new issue