net: phy: as21xxx: better handle PHY HW reset on soft-reboot

Browse source

[ Upstream commit b4d5cd2050 ]

On soft-reboot, with a reset GPIO defined for an Aeonsemi PHY, the
special match_phy_device fails to correctly identify that the PHY
needs to load the firmware again.

This is caused by the fact that PHY ID is read BEFORE the PHY reset
GPIO (if present) is asserted, so we can be in the scenario where the
phydev have the previous PHY ID (with the PHY firmware loaded) but
after reset the generic AS21xxx PHY is present in the PHY ID registers.

To better handle this, skip reading the PHY ID register only for the PHY
that are not AS21xxx (by matching for the Aeonsemi Vendor) and always
read the PHY ID for the other case to handle both firmware already
loaded or an HW reset.

Fixes: 830877d89e ("net: phy: Add support for Aeonsemi AS21xxx PHYs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250823134431.4854-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

...

This commit is contained in:

Christian Marangi 2025-08-23 15:44:29 +02:00 • committed by Greg Kroah-Hartman

parent ac48447b5b

commit 999d89cd99

1 changed files with 4 additions and 3 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

7

drivers/net/phy/as21xxx.c

View file