diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
new file mode 100644
index 000000000000..eeb148081663
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4062.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4062 ADC family device driver
+
+maintainers:
+  - Jorge Marques <jorge.marques@analog.com>
+
+description: |
+  Analog Devices AD4062 Single Channel Precision SAR ADC family
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4060.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4062.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4060
+      - adi,ad4062
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Two pins are available that can be configured as either a general purpose
+      digital output, device enable signal (used to synchronise other parts of
+      the signal chain with ADC sampling), device ready (GP1 only) or various
+      interrupt signals. If intended for use as a GPIO or device enable, will not
+      present here.
+    minItems: 1
+    items:
+      - description:
+          GP0 pin, cannot be configured as DEV_RDY.
+      - description:
+          GP1 pin, can be configured to any setting.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: gp0
+      - const: gp1
+
+  gpio-controller:
+    description:
+      Marks the device node as a GPIO controller. GPs not listed as interrupts
+      are exposed as a GPO.
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+  vdd-supply:
+    description: Analog power supply.
+
+  vio-supply:
+    description: Digital interface logic power supply.
+
+  ref-supply:
+    description:
+      Reference voltage to set the ADC full-scale range. If not present,
+      vdd-supply is used as the reference voltage.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+
+allOf:
+  - $ref: /schemas/i3c/i3c.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i3c {
+        #address-cells = <3>;
+        #size-cells = <0>;
+
+        adc@0,2ee007c0000 {
+            reg = <0x0 0x2ee 0x7c0000>;
+            vdd-supply = <&vdd>;
+            vio-supply = <&vio>;
+            ref-supply = <&ref>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <0 0 IRQ_TYPE_EDGE_RISING>,
+                         <0 1 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gp0", "gp1";
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i3c {
+        #address-cells = <3>;
+        #size-cells = <0>;
+
+        adc@0,2ee007c0000 {
+            reg = <0x0 0x2ee 0x7c0000>;
+            vdd-supply = <&vdd>;
+            vio-supply = <&vio>;
+            ref-supply = <&ref>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9a42d20144a4..dfd06a31c969 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1433,6 +1433,12 @@ F:	Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
 F:	Documentation/iio/ad4030.rst
 F:	drivers/iio/adc/ad4030.c
 
+ANALOG DEVICES INC AD4062 DRIVER
+M:	Jorge Marques <jorge.marques@analog.com>
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad4062.yaml
+
 ANALOG DEVICES INC AD4080 DRIVER
 M:	Antoniu Miclaus <antoniu.miclaus@analog.com>
 L:	linux-iio@vger.kernel.org