arm64: zynqmp: Disable Tri-state for SDIO

Browse source

Since the zynqmp pinctrl driver now includes support for the
tri-state registers, ensure that the pins needing output-enable
are correctly configured for SOMs.

Currently, there is an issue with the detection of the MMC for
the SOM kv260, resulting in the following error:
ZynqMP> mmc dev 1
Card did not respond to voltage select! : -110

To address this problem, configure the SDIO pins for output-enable
to enable MMC detection.

Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/540f83f7d88b80441c9fa3d771dd7b000b0710a4.1716802450.git.michal.simek@amd.com

...

This commit is contained in:

Tejas Bhumkar 2024-05-27 11:34:13 +02:00 • committed by Michal Simek

parent a520fcceb9

commit a082e297fa

2 changed files with 2 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

1

arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso

View file

1

arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso

View file