i2c: imx-lpi2c: reset controller in probe stage

Browse source

Reset I2C controller in probe stage to avoid unexpected LPI2C controller
state left from previous stages and hang system boot.

Per the LPI2C reference manual, section 7.1.4 "Controller Control (MCR)"
and 7.1.20 Target Control (SCR), the RST bit (bit 1) description states:

  "The reset takes effect immediately and remains asserted until negated
  by software. There is no minimum delay required before clearing the
  software reset."

Therefore, it is safe to write 0 to MCR and SCR immediately after
asserting the RST bit without any additional delay.

Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260716071957.2670263-3-carlos.song@oss.nxp.com

...

This commit is contained in:

Carlos Song 2026-07-16 15:19:57 +08:00 • committed by Andi Shyti

parent cbd043b00e

commit a4c419356a

No known key found for this signature in database

GPG key ID: DA78056626D32D6E

1 changed files with 14 additions and 5 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

19

drivers/i2c/busses/i2c-imx-lpi2c.c

View file