mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
IIO: New devices support, features and cleanup for 7.1
Includes merge of v7.0-rc4 to pull in a fix and a merge of ib-iio-thermal-qcom-pmic5 immutable branch (provided from the IIO tree so thermal could also pick this up and add thermal specific remainder of the series on top. New device support ------------------ adi,ad4030 - Add support for ADA4316 and ADAQ4224 ADCs with PGAs. adi,ad4080 - Add support for AD4082, AD4085 and AD4088 ADCs. adi,ad8366 - Add ADRF5702 and ADRF5703 digital step attenuators. adi,adxl372 - Add support for the ADXL371 accelerometer after refactors to allow multiple device variants to be supported by the driver. In particular a silicon issue means the hardware FIFO doesn't work on the ADXL371 bosch,bma255/bmg160 - Add support for BMX055 gyroscope and magnetometer (effectively separate devices from point of view of interface). lltc,ltc2309 - Add support for LTC2305 2 channel 12-bit ADC. lltc,ltc2532 - Add support for 4 variants of the LTC2654 quad DAC. maxim,ds4424 - Add IDs for DS4402 and DS4404 parts. Initially patch is ID only but additional features also added that are device dependent. qcom,spmi-adc-gen3 - New driver supporting this generation of Qualcomm's SoC ADC. st,vl53l1 - New driver for this Time Of Flight (TOF) sensor. ti,ina2xx - Support the INA236 digital power monitor. vishay,vcnl4000 - Add support for CM36686 ambient light and proximity sensor. - Add support for CM36672P proximity sensors. ID only additions. amlogic,meson-adc - Support the Meson S4. Features -------- iio-backend framework - Add capability discovery so front end drivers can know what features are available from the backend and adjust how they operate. adi,ad4030 - Add SPI offload support requiring a non trivial PWM setup. adi,ad7380 - Add support for multiple SPI lanes to improve throughput. adi,ad7768-1 - Support SPI offload and always use continuous mode, enabling more filter options. adi,ad8366 - Device tree bindings and support. aspeed,adc - Handle battery channel. maxim,ds4424 - Add external resistor controlled scale and per-variant limits. - Handle per variant range limits. - Move it to regmap. motorola,cpcap-adc - Support for the ADC found on the Motorola Mot board. Effectively some board specific configuration handled in the driver. vishay,vcnl4000 - Support explicit power supply regulators. tyhx,hx9023s - Allow device tree specification of firmware file name. Cleanup and minor fixes ----------------------- treewide - Remove a bunch of unused structure elements. - Replaces standard fixed width integers with kernel types. - Replace some other error values that were returned on allocation failure with -ENOMEM iio-core - Replace a few custom devm implementations for devm_add_action_or_reset() iio-trigger - Use put_device() to cleanup on error. iio-backend - Use __free(fwmode_handle) to simplify some code. hw-consumer - Use separate allocation for scan mask bitmap to simplify code. acpi-als - Switch from ACPI driver to platform driver. adi,ad4030 - Use BIT() to replace values that are always a power of 2 to slightly improve readability. adi,ad4062 - Add a missing check for error form iio_get_current_scan_type() adi,ad5933 - Use div64_ul() rather than do_div() as remainder was not used. adi,ad7191 - Documentation fixes related to clocks adi,ad7816 - Use sysfs_emit() adi,ad8366 - General driver modernization adi,adf4350 - Change a TOOD to NOTE in a comment to avoid anyone from walking into a tricky to improve corner case. adi,admv1013 - Avoid a null pointer dereference if device_property_read_string() fails. adi,admv4420 - Return error code rather than -1.. adi,adxl345 - Add separate scaling for events from that of raw channels. amlogic,meson-adc - Don't bother keeping nvmem cell access around when only used in probe. atmel,at91-sama5d - Don't bother keeping nvmem cell access around when only used in probe. bosch,bmc150 - Use sysfs_emit() in a few places. honeywell,hsc030pa - Improve handling of return values from i2c_transfer. liteon,ltr501 - Return error values rather than -1 replaced by -EINVAL at higher levels of the callstack. maxim,ds4424 - A bunch of general minor improvements prior to adding new features. maxim,max11410 - Make some const string arrays static. maxim,max5522 - Use devm_regulator_get_enable_read_voltage() at probe to cache the voltage rather than keeping the regulator around to access and query later. vishay,vcnl4000 - Various code improvements. sharp,gp2ap020a00f - General driver modernization. silabs,si7210 - Use devm_regulator_get_enable_read_voltage() at probe to cache the voltage rather than keeping the regulator around to access and query later. st,lsm6dsx - Add SMOCF00 ACPI ID seen on products by SHIFT. st,st_sensors - Fix up various kernel-doc issues. - Avoid kmalloc of a single use buffer and instead reused existing buffer_data. taos,tsl2772 - Fix some kernel-doc warnings due to missing : ti,ads7950 - Use iio_push_to_buffers_with_ts_unaligned() as first few elements of array are not the data that is pushed. - Move from array of chip_info structures to individual named ones. This is part of slowly replacing use of a code pattern that we don't want replicated in new drivers. vti,sca3000 - General driver modernization included use of devm and guard(). Various other more minor stuff not called out explicitly. Includes things like typo fixes, use of dev_err_probe() and local variables to avoid repeated dereferencing of the same member as well as increasing use of guard() to simplify release of locks. Another slow improvement to code quality is both standardizing on header order and ensure all appropriate headers are included. -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmnINKERHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FognJg//a2J1qP+D8gf3nfBdrTyLaS7DCQZib60V 0wHrSewlT49fM2P1A4Y//cNV+wekb84EAmZLduxaRLkgHC8ZAeGxWy6DY2q0SFww AN20+6toP3M1J7eIRW7ENB7aqwAczu/SzU+6fGcwxGicbjorDE1iQHiR38eXuKqi l8kjV4YO4PICHkQWU7D0y2D7Nvp/BgBwDmtRzzfVdtIMYcyaOH5fvDFByfaQiTW6 rftwvzFH3lgV2pMOMUDwa0e071DQhMLxjleFwAW5jbvMqXf/15379tVXhFA6BhMi T1wlB10w1xl0QBbmYJrDOIpaFT4BdET+pQyrlB74sDrVbFF2ip8a1e4ux0fCPZIZ qmBAjzTTtE36PFWVdak8PCasEuyKGEpsSMfSOpmZZEaXFTAjKISuKLZrCuHgmkIl BY+Vswq5trkLF3GLLc8me+4L3hG4ujx40OZEk42G2B10kAJXyvG5bHGeJ0Jy/B3O CaMweZJeDBloZyXwrgNx5n+wIeKm7g6SqcL+85XMSN9x+jh4FcBDoHTFXAq5kqlv u4hWg2fjoyu+O/CRHRBLIfg5CBd+8oNlf8kbSa1wx1VY4IHSO9z5Xj/se+VSTew3 haCR/wvVG4Rs33krGyYnjMhoOGOnFZkiHoI85ATqsb+ZRzZdFWG+5mb5wN5Hgt5V I6KAnuZNsrI= =/WQe -----END PGP SIGNATURE----- Merge tag 'iio-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: New devices support, features and cleanup for 7.1 Includes merge of v7.0-rc4 to pull in a fix and a merge of ib-iio-thermal-qcom-pmic5 immutable branch (provided from the IIO tree so thermal could also pick this up and add thermal specific remainder of the series on top. New device support ------------------ adi,ad4030 - Add support for ADA4316 and ADAQ4224 ADCs with PGAs. adi,ad4080 - Add support for AD4082, AD4085 and AD4088 ADCs. adi,ad8366 - Add ADRF5702 and ADRF5703 digital step attenuators. adi,adxl372 - Add support for the ADXL371 accelerometer after refactors to allow multiple device variants to be supported by the driver. In particular a silicon issue means the hardware FIFO doesn't work on the ADXL371 bosch,bma255/bmg160 - Add support for BMX055 gyroscope and magnetometer (effectively separate devices from point of view of interface). lltc,ltc2309 - Add support for LTC2305 2 channel 12-bit ADC. lltc,ltc2532 - Add support for 4 variants of the LTC2654 quad DAC. maxim,ds4424 - Add IDs for DS4402 and DS4404 parts. Initially patch is ID only but additional features also added that are device dependent. qcom,spmi-adc-gen3 - New driver supporting this generation of Qualcomm's SoC ADC. st,vl53l1 - New driver for this Time Of Flight (TOF) sensor. ti,ina2xx - Support the INA236 digital power monitor. vishay,vcnl4000 - Add support for CM36686 ambient light and proximity sensor. - Add support for CM36672P proximity sensors. ID only additions. amlogic,meson-adc - Support the Meson S4. Features -------- iio-backend framework - Add capability discovery so front end drivers can know what features are available from the backend and adjust how they operate. adi,ad4030 - Add SPI offload support requiring a non trivial PWM setup. adi,ad7380 - Add support for multiple SPI lanes to improve throughput. adi,ad7768-1 - Support SPI offload and always use continuous mode, enabling more filter options. adi,ad8366 - Device tree bindings and support. aspeed,adc - Handle battery channel. maxim,ds4424 - Add external resistor controlled scale and per-variant limits. - Handle per variant range limits. - Move it to regmap. motorola,cpcap-adc - Support for the ADC found on the Motorola Mot board. Effectively some board specific configuration handled in the driver. vishay,vcnl4000 - Support explicit power supply regulators. tyhx,hx9023s - Allow device tree specification of firmware file name. Cleanup and minor fixes ----------------------- treewide - Remove a bunch of unused structure elements. - Replaces standard fixed width integers with kernel types. - Replace some other error values that were returned on allocation failure with -ENOMEM iio-core - Replace a few custom devm implementations for devm_add_action_or_reset() iio-trigger - Use put_device() to cleanup on error. iio-backend - Use __free(fwmode_handle) to simplify some code. hw-consumer - Use separate allocation for scan mask bitmap to simplify code. acpi-als - Switch from ACPI driver to platform driver. adi,ad4030 - Use BIT() to replace values that are always a power of 2 to slightly improve readability. adi,ad4062 - Add a missing check for error form iio_get_current_scan_type() adi,ad5933 - Use div64_ul() rather than do_div() as remainder was not used. adi,ad7191 - Documentation fixes related to clocks adi,ad7816 - Use sysfs_emit() adi,ad8366 - General driver modernization adi,adf4350 - Change a TOOD to NOTE in a comment to avoid anyone from walking into a tricky to improve corner case. adi,admv1013 - Avoid a null pointer dereference if device_property_read_string() fails. adi,admv4420 - Return error code rather than -1.. adi,adxl345 - Add separate scaling for events from that of raw channels. amlogic,meson-adc - Don't bother keeping nvmem cell access around when only used in probe. atmel,at91-sama5d - Don't bother keeping nvmem cell access around when only used in probe. bosch,bmc150 - Use sysfs_emit() in a few places. honeywell,hsc030pa - Improve handling of return values from i2c_transfer. liteon,ltr501 - Return error values rather than -1 replaced by -EINVAL at higher levels of the callstack. maxim,ds4424 - A bunch of general minor improvements prior to adding new features. maxim,max11410 - Make some const string arrays static. maxim,max5522 - Use devm_regulator_get_enable_read_voltage() at probe to cache the voltage rather than keeping the regulator around to access and query later. vishay,vcnl4000 - Various code improvements. sharp,gp2ap020a00f - General driver modernization. silabs,si7210 - Use devm_regulator_get_enable_read_voltage() at probe to cache the voltage rather than keeping the regulator around to access and query later. st,lsm6dsx - Add SMOCF00 ACPI ID seen on products by SHIFT. st,st_sensors - Fix up various kernel-doc issues. - Avoid kmalloc of a single use buffer and instead reused existing buffer_data. taos,tsl2772 - Fix some kernel-doc warnings due to missing : ti,ads7950 - Use iio_push_to_buffers_with_ts_unaligned() as first few elements of array are not the data that is pushed. - Move from array of chip_info structures to individual named ones. This is part of slowly replacing use of a code pattern that we don't want replicated in new drivers. vti,sca3000 - General driver modernization included use of devm and guard(). Various other more minor stuff not called out explicitly. Includes things like typo fixes, use of dev_err_probe() and local variables to avoid repeated dereferencing of the same member as well as increasing use of guard() to simplify release of locks. Another slow improvement to code quality is both standardizing on header order and ensure all appropriate headers are included. * tag 'iio-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (217 commits) Docs: iio: ad7191 Correct clock configuration iio: amplifiers: ad8366: add support for adrf5702/3 dt-bindings: iio: amplifiers: ad8366: add adrf5702/3 support iio: adc: meson-saradc: add support for Meson S4 dt-bindings: iio: adc: amlogic,meson-saradc: add S4 compatible iio: imu: st_lsm6dsx: Add ACPI ID for SHIFT13mi gyroscope iio: proximity: add driver for ST VL53L1X ToF sensor dt-bindings: iio: proximity: add ST VL53L1X ToF sensor iio: adc: max11410: make vref register name arrays static const iio: accel: bmc150-accel-core: use sysfs_emit() in show functions iio: frequency: adf4350: replace TODO with NOTE in adf4350_set_freq() iio: adc: ltc2309: add support for ltc2305 iio: adc: ltc2309: explicitly assign hex values to channel enums dt-bindings: adc: ltc2497: add support for ltc2305 iio: accel: adxl380: fix typo in PART_ID register macro iio: dac: ds4424: add Rfs-based scale and per-variant limits dt-bindings: iio: dac: maxim,ds4424: add maxim,rfs-ohms property iio: dac: ds4424: convert to regmap iio: dac: ds4424: support per-variant output range limits iio: dac: ds4424: add DS4402/DS4404 device IDs ...
This commit is contained in:
Greg Kroah-Hartman
commit
a8a37957f2
165 changed files with 5740 additions and 2166 deletions
29
MAINTAINERS
29
MAINTAINERS
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue