spi: spi-nxp-fspi: add the support for sample data from DQS pad

Browse source

[ Upstream commit c07f270323 ]

flexspi define four mode for sample clock source selection.
Here is the list of modes:
mode 0: Dummy Read strobe generated by FlexSPI Controller and loopback
        internally
mode 1: Dummy Read strobe generated by FlexSPI Controller and loopback
        from DQS pad
mode 2: Reserved
mode 3: Flash provided Read strobe and input from DQS pad

In default, flexspi use mode 0 after reset. And for DTR mode, flexspi
only support 8D-8D-8D mode. For 8D-8D-8D mode, IC suggest to use mode 3,
otherwise read always get incorrect data.

For DTR mode, flexspi will automatically div 2 of the root clock
and output to device. the formula is:
    device_clock = root_clock / (is_dtr ? 2 : 1)
So correct the clock rate setting for DTR mode to get the max
performance.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-4-bb9fe2a01889@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a89103f671 ("spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate")
Signed-off-by: Sasha Levin <sashal@kernel.org>

...

This commit is contained in:

Haibo Chen 2025-09-17 15:27:09 +08:00 • committed by Greg Kroah-Hartman

parent b7d5e51661

commit ac6845a5ba

1 changed files with 53 additions and 3 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

56

drivers/spi/spi-nxp-fspi.c

View file