spi: spi-nxp-fspi: enter stop mode before reconfiguring MCR0 and DLL

Browse source

In nxp_fspi_select_mem() the RX sample clock source (MCR0[RXCLKSRC])
and the DLL control registers (DLLxCR) are reconfigured while the
FlexSPI module is still enabled. According to the FlexSPI reference
manual initialization sequence, MCR0 and the DLL control registers
should be programmed while the module is in stop mode, i.e. with
MCR0[MDIS] set to 1, and the module re-enabled (MCR0[MDIS] = 0)
afterwards.

Wrap the RX sample clock source selection and the DLL calibration/
override reconfiguration in a stop-mode window to align with the RM
and avoid reconfiguring timing-critical registers while the module is
active.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-2-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

...

This commit is contained in:

Haibo Chen 2026-07-28 18:18:09 +08:00 • committed by Mark Brown

parent 9c19d60fea

commit b4bde5cfff

No known key found for this signature in database

GPG key ID: 24D68B725D5487D0

1 changed files with 14 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

14

drivers/spi/spi-nxp-fspi.c

View file