net: phy: realtek: add RTL8224 polarity support

Browse source

The RTL8224 has a register to configure the polarity of every pair of
each port. It provides device designers more flexbility when wiring the
chip.

Unfortunately, the register is left in an unknown state after a reset.
Thus on devices where the bootloader don't initialize it, the driver has
to do it to detect and use a link.

The MDI polarity swap can be set in the device tree using the property
enet-phy-pair-polarity. The u32 value is a bitfield where bit[0..3]
control the polarity of pairs A..D.

Signed-off-by: Damien Dejean <dam.dejean@gmail.com>
Link: https://patch.msgid.link/20260318215502.106528-5-dam.dejean@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

...

This commit is contained in:

Damien Dejean 2026-03-18 22:55:01 +01:00 • committed by Jakub Kicinski

parent 58ffb5910f

commit beed9c0e9b

1 changed files with 33 additions and 1 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

34

drivers/net/phy/realtek/realtek_main.c

View file