riscv: dts: spacemit: k1-bananapi-f3: add SD card support with UHS modes

Browse source

Add complete SD card controller support with UHS high-speed modes.

- Enable sdhci0 controller with 4-bit bus width
- Configure card detect GPIO with GPIO_ACTIVE_LOW and internal pull-up
  support
- Connect vmmc-supply to buck4 for 3.3V card power
- Connect vqmmc-supply to aldo1 for 1.8V/3.3V I/O switching
- Add dual pinctrl states for voltage-dependent pin configuration
- Support UHS-I SDR25, SDR50, and SDR104 modes
- Add stable MMC device aliases (mmc0 = eMMC, mmc1 = SD card)

This enables full SD card functionality including high-speed UHS modes
for improved performance.

Suggested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Margherita Milani <margherita.milani@amarulasolutions.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://patch.msgid.link/20260515-orangepi-sd-card-uhs-v10-3-094af27e310d@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>

...

This commit is contained in:

Iker Pedrosa 2026-05-15 12:49:01 +02:00 • committed by Yixun Lan

parent 2585c60ce2

commit c76e2f058c

1 changed files with 22 additions and 2 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

24

arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts

View file