arm64: dts: rockchip: Add frl-enable-gpios to rk3588s-gameforce-ace

Browse source

The board exposes the GPIO4_B3 pin to control the voltage bias on the
HDMI0 data lines.  It must be asserted when operating in HDMI 2.1 FRL
mode and deasserted for HDMI 1.4/2.0 TMDS mode.

Wire up the hdmi0 node to its dedicated GPIO via frl-enable-gpios to
allow adjusting the bias when transitioning between TMDS and FRL modes.

Additionally, drop the now unnecessary ddc-en-gpios property and the
associated pinctrl-* entries from hdmi0-con, and rename the hdmi0_en
pinmux to hdmi0_tx_on_h, in line with the naming commonly used in
RK3588s-based board schematics.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260428-dts-rk-frl-enable-gpios-v2-6-924df9db884a@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

...

This commit is contained in:

Cristian Ciocaltea 2026-04-28 00:57:24 +03:00 • committed by Heiko Stuebner

parent 3305c44489

commit cb3ee61e35

1 changed files with 3 additions and 5 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

8

arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts

View file