mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan Carpenter) - Improve bitfield manipulations on Armada (Bryan B. Lima) - Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang) - Fix wrong boundary when clamping the low values in the set_trips() callback and fix wrong mask when setting the temperature interval on Airoha (Christian Marangi) - Make use of the regmap API in order to support the Airoha AN7583 (Christian Marangi) - Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC sensor (Rakesh Kota) - Fix unbalanced clock enablement when the resume fails on the iMX driver (Can Peng) - Add Qualcomm Master BandGap thermal monitor support (Satya Priya Kakitapalli) - Add Maili Temperature bindings compatible (Haritha S K) - Add a devm action to clean hardware interrupts, sampling, and control registers on Spacemit K1 (Pei Xiao) - Fix trivial typo in an OF code comment (Marek Vasut) - Remove unecessary print on Qcom SPMI ADC driver when a call to devm_request_threaded_irq() fails as this one already prints a message (Jishnu Prakash) - Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and shared interrupt with the IIO driver (Jishnu Prakash) - Make resets optional on MT8196 and add the corresponding property in the DT bindings (AngeloGioacchino Del Regno) - Fix clock staying enabled with the resume operation fails on Qoriq (Can Peng) - Fix wrong closing brace position in thermal library header (Andreas Haufler) - Fix low and high trip point validation by moving the check after the clamp on the spacemit driver (surendra) - Remove redundant error messages on IRQ request failure (Pan Chuang) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmp2NLQACgkQqDIjiipP 6E98UAf/SqeabRuCefz1qn4zdjQHL4jiIEHrhRvXLSPb2ooVhzZYpOP5sUXFG1W5 XxncjSyo7ZJKhVXrCd7II7GW6+3TqujM+MWpcYBerGsrLH0YudcOkAl8gTkhSXfV ZfuKbSYR+mrLyWbszIzbyknaGFFt4xdkusTldhWA80dHb1G5o055/unVtVEDDn65 ciLmZqHBW+r0ureVhu6FJ5FNozCKfX4hXZOsX95FvIJEBvlDORHZmCEsaxbD1bem mMcs2tU74s2eJtRmKuq7A2ddw23dUTxTUciiCh6r5h/dI0MTxaEZUpF5TjXvfEQE Ick0gsWEc77263AS/2WAoTodQfBP5A== =8Vte -----END PGP SIGNATURE----- Merge tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano: "- Move thermal_zone_device_enable() to the right place in order to prevent calling it if the thermal zone registration failed (Dan Carpenter) - Improve bitfield manipulations on Armada (Bryan B. Lima) - Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang) - Fix wrong boundary when clamping the low values in the set_trips() callback and fix wrong mask when setting the temperature interval on Airoha (Christian Marangi) - Make use of the regmap API in order to support the Airoha AN7583 (Christian Marangi) - Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC sensor (Rakesh Kota) - Fix unbalanced clock enablement when the resume fails on the iMX driver (Can Peng) - Add Qualcomm Master BandGap thermal monitor support (Satya Priya Kakitapalli) - Add Maili Temperature bindings compatible (Haritha S K) - Add a devm action to clean hardware interrupts, sampling, and control registers on Spacemit K1 (Pei Xiao) - Fix trivial typo in an OF code comment (Marek Vasut) - Remove unecessary print on Qcom SPMI ADC driver when a call to devm_request_threaded_irq() fails as this one already prints a message (Jishnu Prakash) - Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and shared interrupt with the IIO driver (Jishnu Prakash) - Make resets optional on MT8196 and add the corresponding property in the DT bindings (AngeloGioacchino Del Regno) - Fix clock staying enabled with the resume operation fails on Qoriq (Can Peng) - Fix wrong closing brace position in thermal library header (Andreas Haufler) - Fix low and high trip point validation by moving the check after the clamp on the spacemit driver (surendra) - Remove redundant error messages on IRQ request failure (Pan Chuang) * tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal/drivers: Remove redundant error messages on IRQ request failure thermal/drivers/spacemit: Validate clamped trip thresholds tools/lib/thermal: Fix misplaced extern "C" closing brace thermal/drivers/qoriq: Disable clock on resume failure thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196 dt-bindings: thermal: mediatek: Make resets optional for MT8196 thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print thermal/of: Fix trivial enabled typo thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring dt-bindings: thermal: Add Qualcomm MBG thermal monitor support thermal/drivers/imx: Disable clock on runtime resume failure thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp thermal/drivers/airoha: Add support for AN7583 Thermal Sensor dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function thermal/drivers/airoha: Generalize probe function ...
This commit is contained in:
Rafael J. Wysocki
commit
ccda015d76
38 changed files with 992 additions and 275 deletions
Loading…
Add table
Add a link
Reference in a new issue