PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value

Browse source

Add the PCIE_RESET_CONFIG_DEVICE_WAIT_MS macro to define the minimum
waiting time between exit from a conventional reset and sending the
first configuration request to the device.

As described in PCIe r6.0, sec 6.6.1 <Conventional Reset>, there are two
different use cases of the value:

   - "With a Downstream Port that does not support Link speeds greater
     than 5.0 GT/s, software must wait a minimum of 100 ms following exit
     from a Conventional Reset before sending a Configuration Request to
     the device immediately below that Port."

   - "With a Downstream Port that supports Link speeds greater than
     5.0 GT/s, software must wait a minimum of 100 ms after Link training
     completes before sending a Configuration Request to the device
     immediately below that Port."

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-21-minda.chen@starfivetech.com
Signed-off-by: Kevin Xie <kevin.xie@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>

...

This commit is contained in:

Kevin Xie 2024-03-28 17:18:33 +08:00 • committed by Bjorn Helgaas

parent d76ef0531c

commit d5ceb9496c

1 changed files with 15 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

15

drivers/pci/pci.h

View file