From d84e27d87738634b92001500435ae4dadba10a13 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=A9my=20Carrat?= Date: Thu, 10 Sep 2026 18:26:09 +0200 Subject: [PATCH] USB: serial: cp210x: add Corsair AX1500i Power Supply MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Corsair AX1500i power supply exposes its Corsair Link monitoring interface on a mini-USB port through an on-board CP2103, using a Corsair-specific product ID. Without the ID in the table no driver binds and no tty is created. Tested by forcing the driver association with echo 1b1c 1c02 > /sys/bus/usb-serial/drivers/cp210x/new_id and then setting the serial port to 115200 8N1. Adding the ID is sufficient to talk to the device: the tty reaches a USB-to-SMBus bridge sitting behind the UART, which identifies itself as "USB to SMB Bridge (Firmware by Ross Fosler)" version 0.9 and relays PMBus reads to the power supply controller. Input voltage and current, input and output power, internal temperature and fan speed were all read back on an AX1500i. [ 7.806181] usb 3-14: New USB device found, idVendor=1b1c, idProduct=1c02, bcdDevice= 1.00 [ 698.526754] usbcore: registered new interface driver cp210x [ 698.526767] usbserial: USB Serial support registered for cp210x [ 698.527863] cp210x 3-14:1.0: cp210x converter detected [ 698.529263] usb 3-14: cp210x converter now attached to ttyUSB0 The related AX1600i (1b1c:1c11, iProduct "USB API") is expected to be the same kind of device but has not been tested here, so it is not added. Cc: stable@vger.kernel.org Signed-off-by: Jérémy Carrat Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 333b8b463704..c3f9add98333 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -223,6 +223,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ + { USB_DEVICE(0x1B1C, 0x1C02) }, /* Corsair AX1500i Power Supply */ { USB_DEVICE(0x1B93, 0x1013) }, /* Phoenix Contact UPS Device */ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */