arm64: dts: ls1028a: fix memory node

Browse source

While enabling EDAC support for the LS1028A it was discovered that the
memory node has a wrong endianness setting as well as a wrong interrupt
assignment. Fix both.

This was tested on a sl28 board. To force ECC errors, you can use the
error injection supported by the controller in hardware (with
CONFIG_EDAC_DEBUG enabled):

 # enable error injection
 $ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl
 # flip lowest bit of the data
 $ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo

Fixes: 8897f3255c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

...

This commit is contained in:

Michael Walle 2021-04-08 13:02:18 +02:00 • committed by Shawn Guo

parent 8967b27a6c

commit dabea675fa

1 changed files with 2 additions and 2 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

4

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

View file