omap: Beagle: only Cx boards use pin 23 for write protect

Browse source

system_rev comes from u-boot and is a constant 0x20, so
Bx boards also fall in this 'if' and will get setup with the
wrong gpio_wp pin. Switch to using the Beagle revision routine
to correcly set pin 23 only for C1/2/3 and C4 Boards. Bx boards
will then use the correct default pin setting.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

...

This commit is contained in:

Robert Nelson 2010-09-23 18:22:48 -07:00 • committed by Tony Lindgren

parent 954bed046f

commit e4916e117a

1 changed files with 2 additions and 1 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

3

arch/arm/mach-omap2/board-omap3beagle.c

View file