i2c: xiic: defer RX_FULL until all trailing bytes are in FIFO

Browse source

For the normal path of xiic_smbus_block_read_setup() -- the trailing
bytes all fit in one Rx FIFO fill -- RFD was programmed two below the
byte count, which fires the RX_FULL interrupt while the last byte is
still in flight. xiic_read_rx() then lands in its bytes_rem == 1 branch
and sets NACK on a byte still on the wire, truncating the read.

Without PEC this is harmless: the truncated byte is the dummy one the
caller never looks at. With PEC enabled it is the PEC byte itself, and
i2c_smbus_check_pec() fails the transfer with -EBADMSG.

Raise the threshold by one so RX_FULL fires only once every remaining
byte is already buffered. That routes the drain through
xiic_read_rx()'s bytes_rem == 0 path, which reads everything out and
emits the stop cleanly. The only change for the non-PEC case is that
the controller waits one extra byte-time before servicing the
interrupt.

rfd_set stays inside the 4 bits of XIIC_RFD_REG_OFFSET: this branch is
only reached when rxmsg_len + pec_len <= IIC_RX_FIFO_DEPTH, so the
value is at most IIC_RX_FIFO_DEPTH - 1.

Fixes: e4c1ff772e ("i2c: xiic: Add smbus_block_read functionality")
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Cc: <stable@vger.kernel.org> # v6.3+
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260924-i2c-xiic-v7-2-df7e752332ef@nexthop.ai

...

This commit is contained in:

Abdurrahman Hussain 2026-09-24 17:10:36 -07:00 • committed by Andi Shyti

parent b7e6df2f52

commit e6fe3ea04f

No known key found for this signature in database

GPG key ID: DA78056626D32D6E

1 changed files with 4 additions and 4 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

8

drivers/i2c/busses/i2c-xiic.c

View file