spi: spi-imx: correctly configure burst length when using dma

Browse source

If DMA is used, burst length should be set to the bus width of the DMA.
Otherwise, the SPI hardware will transmit/receive one word per DMA
request.
Since this issue affects both transmission and reception, it cannot be
detected with a loopback test.
Replace magic numbers 512 and 0xfff with MX51_ECSPI_CTRL_MAX_BURST.

Reported-by Stefan Bigler <linux@bigler.io>

Signed-off-by: Benjamin Bigler <benjamin@bigler.one>
Fixes: 15a6af94a2 ("spi: Increase imx51 ecspi burst length based on transfer length")
Link: https://lore.kernel.org/r/8a415902c751cdbb4b20ce76569216ed@mail.infomaniak.com
Link: https://lore.kernel.org/r/20231209222338.5564-1-benjamin@bigler.one
Signed-off-by: Mark Brown <broonie@kernel.org>

...

This commit is contained in:

Benjamin Bigler 2023-12-09 23:23:26 +01:00 • committed by Mark Brown

parent 7a733e060b

commit e9b220aeac

No known key found for this signature in database

GPG key ID: 24D68B725D5487D0

1 changed files with 11 additions and 4 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

15

drivers/spi/spi-imx.c

View file