iio: imu: adis: Refactor adis_initial_startup

Browse source

All the ADIS devices perform, at the beginning, a self test to make sure
the device is in a sane state. Previously, the logic was that the self-test
was performed in adis_initial_startup() and if that failed a reset was done
and then a self-test was attempted again.

This change unifies the reset mechanism under the adis_initial_startup()
call. A HW reset will be done if  GPIO is configured, or a SW reset
otherwise. This should make sure that the chip is in a sane state for
self-test. Once the reset is done, the self-test operation will be
performed. If anything goes wrong with self-test, the driver should just
bail/error-out (i.e. no second attempt). The chip would likely not be a in
a sane state state if the self-test fails after a reset.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

...

This commit is contained in:

Nuno Sá 2020-02-10 15:26:03 +02:00 • committed by Jonathan Cameron

parent fdcf6bbb4e

commit ecb010d441

1 changed files with 22 additions and 7 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

29

drivers/iio/imu/adis.c

View file