V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer default

Browse source

The IR chip has no address decoding, so the IR data is always present in 
the high byte when doing a read from the saa7146 chip. This means that 
the DEBI address used is irrelevant to the IR decoding logic.
DEBI addresses 0x1XXX are mapped to the registers on the CI module 
itself, but only the lowest two bits are actually used (see EN50221, 
section A.2.2.1), meaning that 0x1234 is equivalent to 0x1000 which maps 
to register 0 (the data register). A read from the data register is 
supposed to be preceded by a read from the size register, so some CI 
modules will be confused (the AlphaCrypt CAM will hang completely).
The attached patch changes the address used when reading the IR data to 
use 0x4000 instead. This is the CI version address, which is a safer 
default, works with the AlphaCrypt CAM and matches the behaviour of the 
Windows driver (AFAIK).

Signed-off-by: David H�rdeman <david@hardeman.nu>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

...

This commit is contained in:

David H�rdeman 2006-10-27 20:56:51 -03:00 • committed by Mauro Carvalho Chehab

parent 6c8c21b911

commit ecba77f246

1 changed files with 8 additions and 1 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

9

drivers/media/dvb/ttpci/budget-ci.c

View file